Footswitch And Footpedal Connections • Headphones - Lexicon VORTEX User Manual

Footswitch and Footpedal
Connections
Footswitches connected via the rear-
panel footswitch jacks allow you to perform
register STEP and BYPASS functions and/
or to control TAP and A/B effect morphing.
Two momentary foot-switches can be wired
to a tip-ring-sleeve connector. A stereo Y-
connector allows two identical single
switches to be used.
Tip Sleeve
TIP
RING
SLEEVE
Ring
Tip Sleeve
TIP
RING
SLEEVE
Ring
An expression pedal connected via the
rear panel pedal jack allows continuous con-
trol of selected front panel parameter.
Tip Sleeve
TIP
RING
SLEEVE
Ring
One footswitch is provided with your unit,
along with a set of labels to identify footswitch
functionality. If you are only going to be using
one footswitch,connect it to perform TAP and
A/B functions, or register STEP and BYPASS
functions, and label it accordingly.
BYPASS
STEP
TAP
Use a second (optional) footswitch to control
A/B
the remaining footswitch functions.
Typical Pot(entiometer)
10-50K
PEDAL Sleeve Tip Ring
A/B TAP
STEP BYPASS
5
Headphones
A stereo signal which is adequate to drive
high-efficiency headphones is available at
the left output, provided no connections are
made through the right output . This feature is
provided as a convenience for practice pur-
poses, and is intended to provide only mod-
est volume.