Product Registration; Installation Considerations - Lexicon RT-20 - REV 1 - 5-06 User Manual

RT-20 Universal Disc Player
• True 2:3 pull-down for the finest film-based DVD reproduction
• Video Adjust for exact, detailed adjustment of video settings
• Three Video Adjust banks for user-defined settings
• 24-bit/192kHz D/A audio conversion
• Digital audio output on S/PDIF coaxial, S/PDIF optical, or AES/
EBU connectors
• Still Frame, Frame-by-Frame, Slow, Random, Repeat, and Program
playback modes
• Stored disc settings for up to 20 discs
• MP3 and JPEG compatibility
• Optional SACD speaker distance compensation
• Audio Synchronization capability
• Composite and S-video output
• Trigger input connector
• IR input connector
• Serial control via RS-232C
• Intuitive user-interface
• Optional 19-inch rack mount kit

PRODUCT REGISTRATION

Please register the RT-20 within 15 days of purchase. Register on-
line at www.lexicon.com or complete and return the Product Regis-
tration Card attached to the back cover of this user guide. Retain
the original, dated sales receipt as proof of warranty coverage.

INSTALLATION CONSIDERATIONS

The RT-20 requires special care during installation to ensure optimal
performance. Pay particular attention to the items below and to
other precautions that appear throughout this user guide.
DO
install the RT-20 on a solid, flat, level surface such as a table or
shelf or in a standard 19-inch equipment rack. An optional rack-
mount kit is available from authorized Lexicon dealers.
D
select a dry, well-ventilated location out of direct sunlight.
O
DO NOT
install the RT-20 on a surface that is unstable or unable
to support all four of its feet (unless the RT-20 is installed in an
equipment rack).
DO NOT
stack the RT-20 directly above heat-producing compo-
nents such as power amplifiers and other stereo equipment that
generate heat during use. Avoid installing the RT-20 near radiators
and other heat-producing appliances.
DO NOT
expose the RT-20 to high temperatures, direct sunlight,
humidity, steam, smoke, dampness, and excessive dust.
DO NOT
install the RT-20 near unshielded TV or FM antennas,
cable TV decoders, and other RF emitting devices that might cause
interference. Replace unshielded cables with shielded cables when-
ever possible.
DO NOT
prevent proper cooling. Do not block or cover ventila-
tion slots and openings on the RT-20 with items such as newspa-
pers, cloths, and curtains. Do not operate the RT-20 on a thick
carpet, bed, sofa, or fabric with a thick pile.
Getting Started
1-3