0X7F Data Request - Lexicon PCM 80 V1.10 Midi Implementation Manual

Lexicon
0x7F Data Request
Host to PCM 80 only. The host may request that a message be sent by the PCM 80.
Byte # Byte Value
1 F0
2 06
3 07
4 0iii iiii
5 0x7F
6 0iii iiii
7-11
12 0xF7
Request Request Byte
System
Config 0x00
Effect Bulk 0x01
Effect Single 0x02
Table 0x03
Table
element 0x04
Chain Bulk 0x05
Chain 0x06
Chain element 0x07
Display 0x08
Parameter 0x0B
Soft Row 0x12
Patch 0x13
Param spec 0x16
Param display 0x17
Effect Info 0x1A
0x1B
Adjust Name 0x1C
0x1D
Patch Display 0x21
Matrix Mapping 0x22
Adjust Value 0x23
Soft Row
Display 0x24
Description Notes
SysEx ID
Lexicon ID
PCM 80 ID
Device ID
Data request
Type of data
requested This matches the message IDs described above, but not all messages
may be requested. See the table below
parameters for
request These depend on the type of message requested. Any unused param-
eters should be set to 0. See the table below
End of SysEx
Parameter bytes Notes
none
Bank
Bank, Offset 0x7F returns dump of currently-running effect, including any unsaved
edits.
Table ID
Table ID, Offset
Chain Group 0=Internal; 1=External (Card)
Chain ID
Chain ID, Offset
none Return dump of current display.
Type, Offset Dependent on parameter type and algorithm.
Offset (0-9) Return matrix positions mapped to specified soft row offset.
PatchID (0-9)
Type, Offset
Type, Offset
Bank, Offset Offset must be 0-49.
Bank
none
Patch#, Pivot Point
Destination List ID,
Destination List Index
none
Algorithm ID 0x7F for currently running algorithm
PCM 80 Version 1.10 MIDI Implementation Details
21