Lexicon NUVERB - FOR MACINTOSH Manual page 36

Learning to Use NuVerb
Click on the first display under the label Parameter. A pop-up menu appears, allowing
selection among the available program parameters. Select Wet-Dry Mix and assign it by
releasing the fader. Now that you have selected a parameter for control, a row of selectable
assignment boxes should appear.
Selecting a parameter for
control here...
Next, select a control source for the Wet-Dry Mix parameter by clicking on the assignment box
labeled Source, and selecting "Fader 1." This assigns the first parameter box on the Hot Page,
and its fader will now control the output mix of this program.
Click OK and return to the Program Editor. Note that the first parameter box on the HotPalette
is now labeled OutMix. Click on this box to pop up a fader, then make adjustments to the value.
Notice that the value displayed in the Program Editor moves as the Hot Fader is moved.
Let's go back to the Fader/MIDI Cntl window and examine the action of some of the other
controls.
To the right of the Source selection are the source Min(imum) and Max(imum) values. These
allow you to select any portion of the source controller's full range to be used for control. These
are selected and controlled by a pop up fader, exactly as the source field. Any value from 0-127
can be assigned to either field, making inverse control possible.
30
30
...displays this line of assignment choices
Lexicon