More On Recording Lists - Lexicon NUVERB - FOR MACINTOSH Manual

NuVerb User Guide
Learning to Use NuVerb

More on Recording Lists

Recording from MIDI
MIDI can be used for automation. Simply select a program and assign MIDI controllers to the
parameters you want to control. When recording a list, parameters remotely controlled via
MIDI go right into the list, as do program changes.
Recording from a Program Editor
Any Program Editor can be opened, and any parameter directly adjusted. This is useful when
you want to adjust a parameter on the fly , but have not selected that parameter for control via
the Hot Faders or via MIDI.
Recording while Stopped
Recording a program change into the list is possible while list is stopped at a Time Code
number. Note, however, that recording parameter changes this way is not recommended.
Recording Multiple parameters
Multiple parameters can be simultaneously recorded into the list by grouping them for control
from a Hot Fader or a MIDI controller. Different levels of change, from this single grouped
control, may be done by setting up the scaling on each control. (See MIDI Control.)
55
55