Lexicon MPX 500 V2 - UPGRADE Installation Instructions Manual page 22

MPX 500 Version 2 Software Release Notes
Miscellaneous
Efx Bal
DlyTapLvl
Delay, Dly Lvl
Dly HiCut
22
Controls the relative amounts of these two effects in the dual effects programs.
parallel, mono split, or dual mono routing configuration, this simply splits the signal feeding
into the two effects. In a cascade configuration, it also allows some of the signal to bypass
either of the two effects.
This is used in dual effects programs in which one of the effects is Dly/Eko and one (or more)
of the delay voices is controlled by Tap, allowing the user to control the level of that voice
mixed into output of the Dly/Eko effect.
These are provided as a bonus in dual-effects programs in which one of the effects is Dly/Eko
and one (or more) of the delay voices are controlled by Tap. These provide manual control
over the delay time and level of non-Tap delay voices, one L and one R. (In the dual mono
configurations, only one of these voices is heard.) The level is generally set to off, but turning
it up will create a non-Tap-controlled delay.
A high-cut filter similar to HF Rlloff, except that it applies only to the Dly/Eko effect. It is
provided in dual-effects programs in which one of the effects is Dly/Eko, allowing
independent control over Dly/Eko high-frequency output.
Lexicon, Inc.
In a