Lexicon MPX 500 V2 - UPGRADE Installation Instructions Manual page 21

-L-, -R/S- continued This is more demanding, and will often achieve better performance with a mono pitch shift
than with a stereo pitch shift.Thus the MPX 500 contains programs for both. The Edit pages for
the mono mode programs offer both "Left" and "Right" versions of key parameters. The stereo
mode programs provide only "Stereo" versions (labeled R/S). (In a mono-mode program the
L and R parameters can be adjusted to be the same, but it will not maintain the stereo
image.)
Dly/Eko Parameters
Dly Lvl Controls the overall level of the signal fed into the Delay/Echo effect.
Dly Fbk A master control that determines the feedback of L into L and R into R.
Dly XFbk A master control that determines the feedback of L into R and R into L.
L Dly 1, R Dly 1 A manual control that sets the delay time (in milliseconds) of the L voice #1 and R voice #1.
The Dly/Eko effect has three independent voices on each side. The non-Tap programs
provide independent control over the delay times of each. In the Tap delays, those times
controlled by Tap are displayed but cannot be changed manually.
Dly Lvl 1 Controls the levels of voice #1 for both L and R.
L Dly 2, R Dly 2, etc. Controls the delay time of voice #2.
Dly Lvl 2, etc. Controls the levels of voice set #2.
MPX 500 Version 2 Software Release Notes
21