Tempo Source; Beat Value; Tap Source; Tap Average - Lexicon MPX 1 V1.10 - MIDI IMPLEMENTATION DETAILS Midi Implementation Manual

V1.10 midi implementation details
Table of Contents

Advertisement

MPX 1 V1.10 MIDI Implementation Details
Tempo Source (Bytes 562-563, Parameter Type 0x010D in V1.00; 0x010E in V1.10)
This parameter defines whether the tempo is derived from the internal value (stored or tapped in) or from
a MIDI clock. Legal values are as follows:
0 - internal tempo source
1 - MIDI tempo source
Beat Value (Bytes 564-565, Parameter Type 0x010E in V1.00; 0x010F in V1.10)
Beat Value defines how the system will interpret each tap it receives. The following values have been
defined for this field:
0
Eighth note
1
Dotted Eighth note
2
Quarter note
3
Dotted Quarter note
4
Half note
5
Dotted Half note
6
Whole note
Tap Source (Bytes 566-567, Parameter Type 0x010F in V1.00; 0x0110 in V1.10)
Tap Source is the number of a controller that will drive the MPX 1 tap function, calculating the tempo in
real-time. Controllers that can be used as Tap Sources are limited to those listed in Appendix A: Controller
Numbers beginning with Footswitch Pulse 1 (tip). All sources preceding this on the list are considered
illegal.
Tap Average (Bytes 568-569, Parameter Type 0x0110 in V1.00; 0x0111 in V1.10)
This field defines how many taps the system averages when it calculates the tempo based on taps. Legal
values are 1-8.
Tap Source Level (Bytes 570-571, Parameter Type 0x0111 in V1.00; 0x0112 in V1.10)
This field defines the threshold which a control source must cross to be interpreted as a tap.
Meter (Bytes 572-573, Parameter Type 0x00F8)
This field defines the signal that drives the MPX 1 display meters. The following sources are available:
0
Inputs
1
Outputs
2
Pitch Input
3
Pitch Output
4
Pitch in (left headroom) and Pitch Output (right headroom)
5
Chorus Input
6
Chorus Output
7
Chorus in (left headroom) and Chorus Output (right headroom)
8
EQ Input
9
EQ Output
10
EQ in (left headroom) and EQ Output (right headroom)
11
Modulation Input
12
Modulation Output
13
Modulation in (left headroom) and Modulation Output (right headroom)
14
Delay Input
15
Delay Output
16
Delay in (left headroom) and Delay Output (right headroom)
17
Reverb Input
18
Reverb Output
19
Reverb in (left headroom) and Reverb Output (right headroom)
20
LFOs (left=LFO 1, right=LFO 2)
21
Envelopes (left=Envelope 1, right=Envelope 2)
22
Footpedal
23
ADRs (left=ADR1, right=ADR2)
36
Lexicon

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpx 1

Table of Contents