HP Sa3110 - VPN Server Appliance Release Notes page 36

IPSec Tunnel May Not Connect if
interfaceIP=0.0.0.0 and autoconnect Set
Reference Number 888
In Release 6.8.2, you may encounter a situation whereby
the progress bar appears on your screen but an IPSec
tunnel will not connect. This results from an
interfaceIP=0.0.0.0 setting (in the vpnuser.ini file) and
autoconnect not working together.
To work around this problem, open the vpnuser.ini file in a
text editor such as Notepad, delete the following line and
save the modified vpnuser.ini file:
interfaceIP = 0.0.0.0
Alternatively, you may change the interfaceIP= setting in
the vpnuser.ini file to the current interface IP address.
Either of these workarounds allows the tunnel to
autoconnect.
36
Hewlett-Packard SA3000 Series VPN Client