HP Sa3110 - VPN Server Appliance Release Notes page 19

Release 6.8.2 Release Notes
2. Use the IP address of the server you want to use for
authentication, instead of using its name. For example,
use 10.250.113.1 instead of auth_server. To specify
the IP address for NDS to use, when the Novell client
logon window appears, click Advanced. The Advanced
section appears. In the Tree Name field, enter the IP
address of the Novell NDS server on the LAN that logs
you into the NDS directory services.
To use the VPN Client software with Novell NetWare 5,
first install and then configure the Novell client. Next,
install and then configure the VPN Client software.
In addition to the previous steps, for NetWare 5, for
Windows 98 only, a patch is required. The patch is a Novell
file called trannta.nlm. Replace the existing
trannta.nlm file that was loaded on your computer
when you installed the Novell client. The patch is in Beta
release, but there are no known problems associated with
it. To obtain the patch, call Novell technical support using
the telephone number you obtain as follows.
To obtain the Novell technical support telephone number
for your area, follow the links on the following URL:
http://support.novell.com
To work with Novell NetWare 5, no action is required in
the VPN Client software.
Sample NWHOST Map File
To allow the Novell client to find the NetWare/IP server
and/or tree:
•
Use an NWHOST file.
•
Use a Domain SAP/RIP Server (DSS) or DNS (for DNS
to work, the client must be configured to use a tree
name that looks like a DNS name, for example,
novell_tree.nwip.shiva.com).
19