HP Sa3110 - VPN Server Appliance Release Notes page 17

Release 6.8.2 Release Notes
2. Click the upgrade file, msdun13.exe, then follow the
instructions on your screen to download the file.
3. Install the upgrade, then reboot your PC.
Also, if you have trouble browsing through a tunnel and
have NetBEUI installed in your network control panel:
1. Check the NetBIOS node type either on the VPN device
or on the VPN Manager.
2. Remove the VPN Client software.
3. Remove the NetBEUI protocol from your network
control panel.
4. Reinstall the VPN Client software.
Inconsistent Behavior When Initial Client-
IP Address Changes
If you change the initial Client-IP address by enabling
DHCP using the Setup, Options sequence of menu
commands, the VPN Client will display inconsistent
behavior. For example, the outcome may be that either the
initial Client-IP address remains unchanged from the initial
IP address, or an IP address somewhat different than the
one assigned will be displayed.
This behavior is exhibited because the Client-IP address
can be adjusted based on the VNIC (virtual network
interface card) number. Since the mask = 8, the last octet
may vary by 7.
Using HP SA3000 Series VPN Client With
Novell NetWare 5
Reference Number 6.7S-1
Connecting to a Novell Network Directory Services (NDS)
tree through a VPN Client SST (Shiva Smart Tunneling)
tunnel is possible if you allow the Novell client
workstation to find the NDS tree. The way in which you
arrange for the workstation to find the NDS resources
depends on the version and network protocol running on
your Novell NetWare server.
17