HP Sa3110 - VPN Server Appliance Release Notes page 26

For example, an IP address of 192.168.255.7 may be
assigned to a VNIC.
Behavior varies depending on how many adapters you
already have installed on your Windows 2000 system.
Initial Cursor Appearance Misleading on
Windows 2000
Reference Number 461P
After installing Release 6.8.2 software and rebooting, the
cursor is flashing in the first field (username) in the
window, but you cannot type in anything until you use
your mouse to put your cursor in that field. Also, the upper
title bar is not blue for the active window.
To work around this problem, either put your cursor in the
username field, or wait two minutes for the bar to turn
blue and the cursor to allow typing in the field.
Automatic Use of IKE Configuration
Window Settings Not Enabled
Reference Number 256P
Automatically using the settings in the IKE configuration
window when creating a new IPSec tunnel is not enabled
so the "Always use these settings when creating a new
tunnel" check box on the Internet Key Exchange (IKE)
window is not available for selection.
VLSM Net-Excludes Do Not Work As
Expected
Reference Number 421P
In Release 6.8.2, variable-length subnet masks (VLSM) net-
excludes do not work as expected. For example, having a
net-include of 0.0.0.0/0 and a net-exclude of
192.168.200.0/24, and a Client-IP address of 192.168.200.50,
should restrict traffic from the VPN Client to the
destination of 192.168.200.0/24. The problem is that the
VPN Client is able to reach remote networks in the address
span of the exclude network space.
26
Hewlett-Packard SA3000 Series VPN Client