Hardware; Led Indicators; D-Link Or Fritzbox Routers - NETGEAR SC101 - Storage Central NAS Server Revised Troubleshooting Manual

Hardware

LED Indicators

This table describes how the SC101 LEDs work.
Light Light State
All lights off Off
Off
Red disk light
On
Off
On
Fast constant
blinking
Green power
1 blink at
status light
intervals (rare)
2 blinks at
intervals (rare)
3 blinks at
intervals
4 blinks at
intervals
Off
Yellow
Ethernet status
On
light
Blinking

D-Link or FritzBox Routers

D-Link router continuously reboots: To fix this, upgrade the SC101 firmware to level
4.14.0.
FritzBox: Upgrade the router to FRITZ!Box Fon WLAN 7050 new firmware 14.03.88
(Released on 10/28/05). Periodically check the FritzBox Web site to download new
firmware for their products.
What It Means
SC101 has no power or
it is not plugged in
There is no disk activity Normal state, do nothing
There is disk activity
Self-test is not finished
SC101 is working
normally
No working hard drives
are inserted
Error on disk 1
Error on disk 2
DHCP network
addressing problem
An older, incompatible
disk is inserted
Disconnected cable
No data is being
transferred over network
Data is being
transferred over network
11
What You Should Do
Check if plug has power
Plug in the SC101
Normal state, do nothing
Normal state, do nothing
Normal state, do nothing
Power off the SC101, insert working
hard drive
If operation continues normally, do
nothing.
Back up the disk or replace it
because disk errors may lead to
some unreadable files.
If operation continues normally, do
nothing.
Back up the disk or replace it
because disk errors may lead to
some unreadable files.
See the User Manual on DHCP
Power off the SC101, replace disk with
ATA6 IDE disk or newer
Check Ethernet cable connection
Normal state, do nothing
Normal state, do nothing