Dynex DX-BGDTC User Manual page 10

10
6 Secure the adapter to the case using the screw you removed from the backplate.
7 Carefully screw the antenna onto the threaded connector on the card.
8 Turn the antenna until it is pointing up.
9 Reinstall your computer's case cover.
10 Plug in the power cord and other cables, then turn on your computer. The Found New
Hardware Wizard opens.
11 Click No, not at this time, then click Next. The Welcome to the Found New Hardware
Wizard Install screen opens.
12 Click Install the software automatically (Recommended), then click Next. The
Completing the Found New Hardware Wizard screen opens.
Setting up your wireless card