EemaX EMT6 Installation And Operating Instruction Manual

EemaX EMT6 Installation And Operating Instruction Manual

Electric mini tank water heaters

Advertisement

Electric Mini Tank Water Heaters
EMT1 - EMT2.5 - EMT4 - EMT6
Installation and Operating Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EMT6 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Technical Data
Dimensions
Provides physical dimensions (A, B, C) for EMT1, EMT2.5, EMT4, and EMT6 models.
Schematic Construction
Illustrates the internal components and their arrangement within the water heater unit.
Wiring Diagram
Details the electrical connections and circuit layout for the water heater.
Installation Instructions
Choosing a Location
Guidance on selecting an accessible location for maintenance and servicing.
Wall Mounting
Steps and considerations for securely mounting the water heater on a wall.
Temperature and Pressure Relief Valve
T/P Valve Discharge Pipe Requirements
Specifies requirements for the discharge pipe of the relief valve for safe operation.
Closed System Thermal Expansion
Preventing Thermal Expansion Issues
Provides two methods to prevent water hammer and pressure buildup from thermal expansion.
Instructions for Use
Setting the Thermostat
Explains how to adjust the thermostat for desired water temperature and indicator light behavior.
Setting Freeze Protection
Details how to protect the unit from freezing during extended periods of non-use.
Maintenance Instructions
Draining and Removing the Water Heater
Step-by-step guide for safely draining and detaching the water heater from plumbing.
Removing the Heating Element
Procedure for safely removing the heating element for maintenance or replacement.
Trouble Shooting
Water Not Getting Hot
Diagnosing issues when the water heater does not produce hot water.
Indicator Light Not On
Troubleshooting steps for a non-functional indicator light.
Brown Water
Identifying the cause of brown or rusty water, typically an anode rod issue.
Odor in Water
Addressing unusual smells in the hot water, often related to the anode rod.
Water Too Hot
Steps to adjust temperature or diagnose thermostat issues if water is excessively hot.
Water Not Hot Enough
Guidance for resolving issues where the water is not heated sufficiently.
Water Leaking
Procedures for diagnosing and addressing leaks in the water heater system.

Table of Contents