Philips 170S5FS - 17" LCD Monitor User Manual page 53

SmartManage
Within monitor control, users can click on Auto Setup to achieve optimum performance or click on
factory reset to reset the parameters of the monitor. Such choices are disabled when using DVI-D
(digit) input.
Q&A
Q1.
A.
across the network
SmartControl is a control panel extension, which helps users to adjust monitor performances and
settings by a software interface, instead of the hardware buttons at the front bezel of the monitors.
Q2.
do I do?
A.
install SmartControl to ensure proper driver is installed.
Q3.
A.
To find out, please right click My Computer and click on Properties->Hardware-> Device Manager.
If you see "Plug and Play Monitor" shows under Monitor, then you need to re-install. Simply remove
SmartControl and re-install it.
Q4.
or a failure message shows, what happened?
file:///D|/My%20documents/dfu/W7/english/170s5/product/smart.htm (4 of 5)6/7/2004 5:26:10 PM
Downloaded from www.Manualslib.com
What is the difference between SmartManage, SmartControl?
SmartManage is a remote management/control software for IT managers to manage monitors
I change the monitor on a PC to a different one and the SmartControl becomes un-usable, what
Restart your PC and see if SmartControl can work. Otherwise, you will need to remove and re-
The SmartControl functions well at the beginning, but it is not workable, what can I do?
If the following actions were executed, the monitor driver may need to be re-installed.
Change video graphic adapter to another one
Update video driver
Activities on OS, such as service pack or patch
Run Windows Update and updated monitor and/or video driver
Windows was booted with the monitor power off or disconnected.
After installing SmartControl, when clicking on SmartControl tab, nothing shows up after a while
manuals search engine