Philips 170S5FS - 17" LCD Monitor User Manual page 26

FAQs (Frequently Asked Questions)
Q:
icm)?
A:
install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a
driver disk when you first install your monitor. Follow the instructions to insert the driver
disk (either floppy or CD-ROM) included in this package. Monitor drivers (.inf and .icm files)
will be installed automatically.
Q:
A:
You can select the desired resolution under Windows® 95/98 with the 'Display properties/
Settings' control panel
Q:
A:
settings.
Q:
A:
at the press of a single button – without the need to navigate through OSD menus and
control keys.
Q:
A:
Q:
A:
scanning lines at the same time, thus distorting the picture.
Q:
file:///D|/My%20documents/dfu/W7/english/170s5/safety/saf_faq.htm (2 of 8)6/7/2004 5:25:55 PM
Downloaded from www.Manualslib.com
What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .
These are the driver files for your monitor. Follow the instructions in your user manual to
How do I adjust the resolution?
Your video card/graphic driver and monitor together determine the available resolutions.
.
What if I get lost when I am making monitor adjustments?
Simply press the OSD button, then select 'Reset' to recall all of the original factory
What is the Auto function?
The AUTO adjustment key restores the optimal screen position, phase and clock settings
My Monitor has no power (Power LED does not light up). What should I do?
Make sure the AC power cord is connected to the Monitor.
Will the LCD monitor accept an Interlace signal?
No. If an Interlace signal is used, the screen displays both odd and even horizontal
What does the Refresh Rate mean for LCD?
manuals search engine