F1PI241EGau
TSG-ANZ-VHD-7-F1PI241EGau-ENCRYPTION-10.4
Page 6 of 11
Self Help Guide
WPA2:-
1) Under Wireless click Security
2) Click WPA2
3) Authentication is Pre-Shared Key – leave all other settings as default
4) In the space provided in Pre-Shared Key, create a password – minimum of eight
(8) characters, it can be any combination of numbers and letters.
5) Click Save Settings
6) Ensure that WPA is still enabled. The password you created earlier is now your
'Network Key' or 'Encryption Key'
This is the 'Key' that will be required to be entered on your wireless MAC. When
you setup your wireless, it will ask for a Password.
Click here for information on how to connect to the Wireless Network.
If you still require further assistance
contact Belkin Technical Support
Call: 1300 55 47 80
Visit: www.belkin.com.au/support