Windows 95, 98 - Asus AAM6010EV-T4 User Manual

The Network Properties dialog box is displayed with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP), the protocol has already been
enabled, in which case you can skip to Step 11.
4. If Internet Protocol (TCP/IP) does not appear as an installed component, click on
5. In the Select Network Component Type dialog box, select Protocol, and then click
.
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click on
You may be prompted to install files from your Windows Me installation CD or other media. Follow
the instructions to install the files.
8. If prompted, click on
9. After restarting your PC, double-click on the Network and Dial-up Connections icon in the
Control Panel.
10. In Network and Dial-up Connections window, right-click on the Network icon, and then select
Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click on
12. In the TCP/IP Settings dialog box, click in the radio button labeled Use the following IP address
and type 192.168.1.x (where x is any number between 2 and 254) and 255.255.255.0 in the IP
address field and Subnet Mask field, respectively.
13. Click on
3.2.5

Windows 95, 98:

1. In the Windows task bar, click on the Start button, point to Settings, and then click Control
Panel.
2. Double-click on the Network icon.
The Network dialog box is displayed with a list of currently installed network components. If the list
includes TCP/IP, the protocol has already been enabled, in which case you can skip to Step 9.
3. If TCP/IP does not appear as an installed component, click on
Network Component Type dialog box appears.
4. Select Protocol, and then click
The Select Network Protocol dialog box appears.
5. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols
list box.
6. Click
You may be prompted to install files from your Windows 95/98 installation CD. Follow the
instructions to install the files.
7. Click on
8. After restarting your PC, open the Control Panel window, and then click on the Network icon.
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the Control Panel.
to return to the Network dialog box, and then click
to restart the PC and complete the TCP/IP installation.
12
AAM6010EV-T4 User Manual
.
.
.
.
. The Select
again.
12