NETGEAR RND4475 - ReadyNAS NV+ NAS Server Software Manual page 95

10. (Optional) In the Backup Options section, adjust option settings.
a. From the Schedule full backup drop-down list, select Every Time.
b. From the On completion send drop-down list, select what type of logs to send when
the recovery job finishes.
You can send a log that lists only errors encountered during recovery, full logs
consisting of file listings (can be large), or status and errors (status refers to
completion status).
Log email messages are restricted to approximately 10,000 lines. For more
information about viewing full logs, see
c. Ensure that the Remove the contents of the backup destination check box is
clear.
Selecting this check box erases the destination path contents before the backup is
performed, which NETGEAR does not recommend for recovery jobs.
WARNING!
When using this option, ensure that you have correctly identified
your backup source and backup destination. If you reverse them,
you might permanently delete your source files. NETGEAR
recommends not enabling this option unless your destination
NETGEAR recommends not enabling this option unless your
destination device is very low on storage space.
Best practice is to experiment with this option using a test share to make sure that
you understand how it works.
d. (Optional) Select the After backup is complete, change ownership of files in the
backup destination check box.
Your ReadyNAS system attempts to maintain original file ownership whenever
possible. However, you can automatically change the ownership of the backed-up
files to match the ownership of the share. This allows anyone who can access the
backup share to have full access to the backed-up files.
11. Click the Apply button.
Your settings are saved and this recovery job displays in the left pane.
Because you cleared the Enable check box, you must manually start the backup job.
12. Highlight this job in the left pane and click the Run button.
The recovery process begins.
13. Click the Go button for this recovery job.
The recovery process begins.
ReadyNAS for Home RAIDiator 5.3
View a Backup Log
Backup and Recovery
95
on page 98.