NETGEAR RND4475 - ReadyNAS NV+ NAS Server Software Manual page 27

During the factory reboot process, you have a 10-minute window to choose a RAID
configuration. RAIDar sends a prompt to click the Setup button during this 10-minute time
frame.
3. Launch RAIDar, highlight your storage system, and click the Setup button.
The ReadyNAS Volume Setup screen displays.
If you do not select a format within 10 minutes, your system reboots in the same mode
that it was previously using.
4. Select the Flexible Volume (Flex-RAID) radio button.
5. (Optional) Click a More button to learn more about X-RAID2 or Flex-RAID.
A pop-up window displays. Click the OK button to close it.
6. From the Select the desired RAID level drop-down list, select a RAID level or JBOD
formatting.
ReadyNAS for Home RAIDiator 5.3
Disk Configuration
27