Advertisement
Table of Contents
- 1 Table of Contents
- 2 Subwoofer Features
- 3 Subwoofer Theile/Small Parameters
- 4 Subwoofer Dimensions Pp-Sw10E
- 5 Subwoofer Dimensions Pp-Sw12E
- 6 Subwoofer Dimensions Pp-Sw15E
- 7 Subwoofer Dimensions Pp-Sw10H
- 8 Subwoofer Dimensions Pp-Sw12H
- 9 Subwoofer Dimensions Pp-Sw15H
- 10 Enclosures
- 11 Enclosure Test Curves
- 12 Tech Tips
- 13 Trouble Shooting
- Download this manual
Advertisement
Table of Contents
Related Manuals for Fusion POWERPLANT PP-SW12H
Summarization of Contents
SUBWOOFER FEATURES
BASKET Construction
Features a high pressure cast aluminium basket for rigidity and style.
CONE ASSEMBLY Design
High performance pressed paper cone for dynamic low bass response.
VOICE COIL Configuration
Dual 4 ohm configuration with high temperature aluminium voice coils.
MOTOR STRUCTURE
High strontium magnetic material for increased power handling and venting.
SUBWOOFER DIMENSIONS
PP-SW10E Dimensions
Detailed physical dimensions for the PP-SW10E subwoofer model.
PP-SW12E Dimensions
Detailed physical dimensions for the PP-SW12E subwoofer model.
PP-SW15E Dimensions
Detailed physical dimensions for the PP-SW15E subwoofer model.
PP-SW10H Dimensions
Detailed physical dimensions for the PP-SW10H subwoofer model.
PP-SW12H Dimensions
Detailed physical dimensions for the PP-SW12H subwoofer model.
PP-SW15H Dimensions
Detailed physical dimensions for the PP-SW15H subwoofer model.
CALCULATING ENCLOSURE VOLUME
Cuft Volume Calculation
Method to calculate enclosure volume in cubic feet using dimensions.
Litres Volume Calculation
Method to calculate enclosure volume in litres using dimensions.
ENCLOSURE TEST CURVES
PP-SW10E Sealed Amplitude Response
Amplitude response graph for PP-SW10E in a sealed enclosure.
PP-SW12E Sealed Amplitude Response
Amplitude response graph for PP-SW12E in a sealed enclosure.
PP-SW15E Sealed Amplitude Response
Amplitude response graph for PP-SW15E in a sealed enclosure.
PP-SW10H Sealed Amplitude Response
Amplitude response graph for PP-SW10H in a sealed enclosure.
PP-SW12H Sealed Amplitude Response
Amplitude response graph for PP-SW12H in a sealed enclosure.
PP-SW15H Sealed Amplitude Response
Amplitude response graph for PP-SW15H in a sealed enclosure.
TECH TIPS
POWER CABLE CALCULATOR
Guide for selecting appropriate power cable gauges based on amperage and length.
OHMS LAW SIMPLIFIED
Visual guide to Ohm's Law formulas for electrical calculations.
SUBWOOFER RULER GUIDE
Marking Mounting Position
Step 1: Mark the centre position on the MDF board for subwoofer mounting.
Fixing Centre Hole
Step 2: Fix the centre hole to the marked position on the MDF board.
SUBWOOFER WIRING FOR DUAL VOICE COIL SUBS
Parallel Voice Coil Wiring (2 Ohm)
Instructions for wiring DVC subwoofers in parallel for 2 Ohm operation.
Series Voice Coil Wiring (8 Ohm)
Instructions for wiring DVC subwoofers in series for 8 Ohm operation.
INSTALLATION WARNINGS
Warning: Disconnect Power
Ensure the vehicle 12 volt lead is removed before connecting any equipment.
Warning: Check Vehicle Environment
Investigate gas tanks, brake lines, and wiring locations before installation.
Warning: Secure Product Mounting
Attach the product securely to prevent damage in case of an accident.
Warning: Protect Wiring
Ensure all wiring is protected to avoid damage or pinching of cables.
Need help?
Do you have a question about the POWERPLANT PP-SW12H and is the answer not in the manual?
Questions and answers