Playing A Disc; Basic Playback; General Features; Brightness Of The Front Panel Display - Denon DVD-1710 Operating Instructions Manual

PLAYING A DISC

Basic Playback

DVD-V CD
Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD player.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
1 Press the POWER ON button.
• "P-ON" will appear briefly on the dis-
play panel.
2
Press the OPEN/CLOSE button
to open disc loading tray.
3 Place the disc in the tray, with the
label facing up.
4 Press the PLAY button.
• The tray will close automatically, then playback will start
from the first chapter or track of the disc. If the playback
does not start automatically, press the PLAY button.
• When you playback the DVD with a title menu, it may
appear on the screen. In this case, refer to "Title
menu".
5
Press the STOP button to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-right on the TV
screen during operation, warning that a
prohibited operation has been encoun-
tered by the DVD player or the disc.
• With DVDs that use some titles for play-
back program signals, playback may
start from the second title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you playback DVDs with
disc menu. Refer to the manual accompanying the disc
for details.

General Features

DVD may contain menus to navigate the disc and access spe-
cial features. Press the appropriate numerical key or use the
Cursor buttons ( K / L / s / B) to highlight your selection in
the DVD main menu and press the ENTER button to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.

Brightness of the Front Panel Display

1 Press the DIMMER button on the front panel to
select the desired brightness of the front panel dis-
play. (Bright, Dimmer, or OFF)
• "Bright" has been selected as the factory default.
NOTES:
• The brightness of the front panel display can be adjust-
ed from the SETUP menu. Details are on page 23.
• When you turn on the power next time, the brightness
of the front panel display will be the settings in SETUP
menu.
MP3 JPEG WMA
DVD-V

Still / Pause

DVD-V CD
1
During playback, press the
STILL/PAUSE button.
• Playback will pause and sound
will be muted.
2 To continue playback, press
the PLAY button.
NOTE:
• Set "STILL MODE" to "FIELD" on the display menu if pic-
tures in the pause mode are blurred. (Refer to page 23.)

Disc Menus

1
Press the MENU button.
• The DVD main menu will appear.
2 If the feature is not available,
appear on the TV screen.
3 If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
4 Press the Cursor buttons (
an item, and the ENTER button to confirm selec-
tion.

Title Menu

1 Press the TOP MENU button.
• The title menu will appear.
2 If the feature is not available,
appear on the TV screen.
3 Press the Cursor buttons (
an item, and the ENTER button to confirm selec-
tion.
• Playback will begin at the selected Title.

CALLING UP A MENU SCREEN DURING PLAYBACK

• Press the MENU button to call up the DVD main menu.
• Press the TOP MENU button to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
– 15 –
MP3 JPEG WMA
F
DVD-V
symbol may
) to select
K / L / s / B
DVD-V
symbol may
) to select
K / L / s / B
DVD-V
EN