Table of Contents
Advertisement
PLAYING A DISC
Basic Playback
DVD-V
CD
Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD player.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
1
Press the POWER ON/OFF button.
• "P-ON" will appear briefly on the display panel.
2
Press the OPEN/CLOSE button
to open disc loading tray.
3
Place the disc in the tray, with the
label facing up.
4
Press the PLAY button.
• The tray will close automatically,
then playback will start from the first
chapter or track of the disc. If the playback does not
start automatically, press the PLAY button.
• When you playback the DVD with a title menu, it may
appear on the screen. In this case, refer to "Title menu".
5
Press the STOP button to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-
right on the TV screen during operation,
warning that a prohibited operation has
been encountered by the DVD player or
the disc.
• With DVDs that use some titles for playback program
signals, playback may start from the second title, or it
may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you playback DVDs with
disc menu. Refer to the manual accompanying the disc
for details.
General Features
DVD may contain menus to navigate the disc and access spe-
cial features. Press the appropriate numerical key or use the
Cursor buttons ( K / L / s / B) to highlight your selection in
the DVD main menu and press the ENTER button to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DVI Setup
1
Press the DVI button on the front panel to select
the DVI output mode.
The output mode changes as follows every time
DVI button is pressed.
• DVI indicator on the front panel lights when DVI output
mode is selected.
OFF
480P
OFF (Default): No video output from the DVI-D OUT connec-
tor.
480P: Video output from the DVI-D OUT jack at 480p.
720P: Video output from the DVI-D OUT jack at 720p.
1080: Video output from the DVI-D OUT jack at 1080i.
NOTES:
• When changing the DVI output mode, video and audio
signals may distorted temporarily.
• Use a display with an HDCP-compatible DVI-D port.
• When there is video output from the DVI-D OUT jack,
no signal is output from the COMPONENT VIDEO OUT
jacks.
MP3
JPEG
WMA
DVD-V
720P
1080
Still / Pause
DVD-V
CD
1
During playback, press the
STILL/PAUSE button.
• Playback will pause and sound
will be muted.
2
To continue playback, press
the PLAY button.
NOTE:
• Set "STILL MODE" to "FIELD" on the display menu if pic-
tures in the pause mode are blurred. (Refer to page 23.)
Disc Menus
1
Press the MENU button.
• The DVD main menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
4
Press the Cursor buttons (
an item, and the ENTER button to confirm selec-
tion.
Title Menu
1
Press the TOP MENU button.
• The title menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
Press the Cursor buttons (
an item, and the ENTER button to confirm selec-
tion.
• Playback will begin at the selected Title.
CALLING UP A MENU SCREEN DURING PLAYBACK
• Press the MENU button to call up the DVD main menu.
• Press the TOP MENU button to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
– 15 –
MP3
JPEG
WMA
F
DVD-V
symbol may
) to select
K / L / s / B
DVD-V
symbol may
) to select
K / L / s / B
DVD-V
EN
Advertisement
Table of Contents
