Refresh Rate; Noise Reduction - Panasonic TH-50PH12L Operating Instructions Manual

REFRESH RATE

This function sets the refresh rate of the display.
This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen À icker.
50 Hz: Enhance the resolution of moving images.
Note:
It is recommended to set to 100 Hz normally.
Press to select REFRESH RATE.
Press to adjust.

NOISE REDUCTION

Sets the following three NR (Noise Reduction) functions together.
VIDEO NR, MOSQUITO NR, BLOCK NR
Press to select "NOISE REDUCTION".
Press to select "OFF", "MIN", "MID", "MAX",
"ADVANCED".
Advanced NR
Sets the three NR functions separately.
1
Press to select "ADVANCED".
Press to enter ADVANCED NR.
P r e s s t o s e l e c t V I D E O N R ,
2
MOSQUITO NR or BLOCK NR.
Press to select "OFF", "MIN", "MID",
"MAX".
VIDEO NR: Automatically reduces unwanted picture noise.
MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR: Reduces block noise when playing MPEG videos.
Notes:
• NOISE REDUCTION cannot be adjusted while a PC signal is being applied.
• BLOCK NR cannot be adjusted while a HD signal is being applied.
SET UP for Input Signals
REFRESH RATE
NOISE REDUCTION
NOISE REDUCTION
[ VIDEO ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
[ COMPONENT ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
q
100 Hz
( )
OFF
( )
ADVANCED
[ RGB ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
[ Digital ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
43