Id Remote Control Function - Panasonic TH-50PH12L Operating Instructions Manual

Item
AI-SYNCRONIZATION
4
Press to exit from adjust mode.

ID Remote Control Function

You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote controller sold separately.
Object model : EUR7636070R
1
Switch to
2
Press the button on the remote control.
3
Press one of -
4
Press one of -
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the ¿ rst two numbers become the ID number
for the remote control.
ID remote control button operation
The operation is the same as normal remote control except for the
ID Cancellation
Press button on remote control. (This has the same effect as pressing the
Notes:
• Set the Remote ID "On" to operate the ID remote control.
If remote ID is set to "On", you can use the remote control without identical ID number during option menu display.
(see page 46)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not
the same as the ID select number (see page 46).
Select "OFF" or "ON".
Note:
If you set AI-SYNCRONIZATION to ON, the following menus will be unavailable and these
settings will be ¿ xed to the initial values.
PICTURE menu: COLOR, TINT, INPUT LEVEL (ADVANCED SETTINGS)
on the right side.
, for the tens digit setting.
, for the units digit setting.
SET UP for MULTI DISPLAY
Details
The brightness depends on each
display's setting.
OFF
button.
Equalize the brightness of all the
displays.
ON
, , buttons at the same time.)
39