Screensaver (For Preventing Image Retention); Setup Of Screensaver Time - Panasonic TH-42PH11MK Operating Instructions Manual

Screensaver
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
1
2
Function selection
3
Mode selection
4
Start setting
5

Setup of Screensaver Time

After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the
Operating Time may be set. (Time cannot be set when "Mode" is "On" or "Off".)
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
Note: Timer function will not work unless "PRESENT TIME" is set.
(For preventing image retention)
Press to display the Setup menu.
Press to select Screensaver.
Press to display Screensaver screen.
Press to select Function.
Press to select the desired function.
Negative image
White screen Overlay scrolling bar
Negative image : Negative image will be displayed on the screen.
Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.
Overlay scrolling bar : The brightness of the image will be decreased and a white bar will scroll on it.
White screen : The whole screen will be white.
Note: Overlay scrolling bar is not effective during two screen display.
Press to select Mode.
Press to select each
mode items.
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.
Note: When the display is turned off, the Scrensaver will be deactivated.
Press to select Start Time / Finish Time
(When Time Designation is selected).
Press to select Periodic Time / Operating Time
(When Interval is selected).
Press to setup.
button: Forward
button: Back
Scrolling bar only
Off
Interval : Operates when Periodic Time and Operating
Time Designation : Operates when Start Time and Finish Time
On : Operates when Start is selected and the
Setup
Signal
Screensaver
Component/RGB-in select
Input label
Power save
Standby save
Power management
Auto power off
OSD Language
Screensaver
Start
Function
Mode
Start Time
Finish Time
Side panel
Wobbling
Peak limit
Time are setup and those times arrive.
are setup and those times arrive.
ACTION ( ) button is pressed.
Screensaver
Start
Function
Mode
Start Time
Finish Time
Screensaver
Start
Function
Mode
Periodic Time
Operating Time
1/2
RGB
PC
Off
Off
Off
Off
English ( UK )
PRESENT TIME 99:99
Scrolling bar only
Off
6:15
12:30
High
Off
Off
PRESENT TIME 15:00
Scrolling bar only
Time Designation
6:15
12:30
PRESENT TIME 15:00
Scrolling bar only
Interval
12:00
3:00
27