Remote Control Transmitter - Panasonic TH-42PH11MK Operating Instructions Manual

Basic Controls

Remote Control Transmitter

SURROUND button
The surround setting switches on and off each time the SURROUND
button is pressed.
The bene¿ ts of surround sound are enormous. You can be completely
enveloped in sound; just as if you were at a concert hall or cinema.
Note:
The surround settings are memorized separately for each Sound Mode
(Normal, Dynamic, Clear).
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 17)
POWER button
The Plasma Display must ¿ rst be plugged
into the wall outlet and turned on at the
power switch (see page 12).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off to
Standby mode.
POS. /SIZE button
(see page 22)
PICTURE button
(see page 23)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
(see page 22, 23, 24, 25)
POSITION buttons
INPUT button
Press to select INPUT1, INPUT2,
INPUT3 and PC input SLOTS
sequentially. (see page 14)
When a dual input terminal board
is attached, A or B is displayed
depending on the selected input
signal. (Ex. INPUT1A, INPUT1B)
MULTI Window buttons
(see page 18)
16
On
Surround
OFF TIMER button
The Plasma Display can be preset
to switch to stand-by after a ¿ xed
period. The setting changes to 30
minutes, 60 minutes, 90 minutes
and 0 minutes (off timer cancelled)
each time the button is pressed.
30 60
0
When three minutes remain, "Off
timer 3" will À ash.
The off timer is cancelled if a
power interruption occurs.
SET UP button (see page 21)
SOUND button (see page 25)
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
R button (see page 21)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to display
the current system status.
Input label
1
Aspect mode (see page 17)
2
Off timer
3
The off timer indicator is displayed only
when the off timer has been set.
Clock display (see page 40)
4
PC
4:3
4 10: 00
Off timer 90
Digital Zoom (see page 20)
Off
On
90
1
2
3