Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Axis Q6045-S PTZ
Summarization of Contents
Regulatory Information
European Compliance
Product meets CE marking directives for EMC, LVD, and RoHS for European markets.
North American Compliance
Product meets US FCC and Canadian ICES-003 standards for RF emission and digital apparatus.
Safety and Disposal
Product Safety Standards
Product complies with IEC/EN 60950-1 and IEC/EN 60950-22 for IT equipment safety.
Disposal and Recycling Guidelines
Guidelines for proper disposal according to local regulations and European WEEE directive.
Safety Information Levels
Hazard Level Definitions
Defines warning levels: DANGER, WARNING, CAUTION, NOTICE for potential risks.
Message Level Explanations
Explains importance levels: Important, Note for product operation and usage.
Safety Instructions
General Safety Warnings
Lists warnings for installation by trained professionals, legal compliance, and product handling.
Transportation Guidelines
Instructions for safe transportation, emphasizing protective packaging.
Battery Information and Replacement
Details the RTC battery, its lifespan, and replacement procedure, advising contact with support.
Battery Safety and Dome Cover Care
Battery Replacement Warnings
Details explosion risk and proper disposal procedures for the RTC battery.
Dome Cover Handling and Cleaning
Provides guidance on protecting and cleaning the dome cover to maintain image quality.
Installation Overview
Installation Steps Sequence
Sequence of steps for installation: checking contents, studying hardware, specifications, installation, and access.
Package Contents List
List of items included in the package: camera, switch, cables, software, and printed materials.
Required Tools for Installation
List of tools needed for installation, including various screwdrivers, wrenches, and pliers.
Product Accessories and Hardware
Optional Accessories List
Details mounting, casing, power, and control accessories available for the camera.
Camera Hardware Identification
Identifies external components of the camera unit.
Dome Cover Assembly Details
Dome Cover Components
Details parts of the dome cover assembly: bracket screw, cover, gasket, ring, and screws.
Sunshield and Media Converter Overview
Sunshield Information
Details the sunshield and its mounting screw holes.
Media Converter Switch Identification
Identifies key components of the media converter switch, including connectors.
Indicator Lights and Connectors
LED Indicator Meanings
Explains the status indications for camera and media converter switch LEDs.
Connector Specifications Reference
Provides reference to detailed connector specifications on page 16.
Cable and Connector Specifications
Multi-Connector Cable Functions and Pinout
Details the cable's signals (power, Ethernet, I/O) and pin assignments.
Switch Connector Reference
Refers to page 16 for detailed specifications of media converter switch connectors.
Network and I/O Connections
Cable Connection Requirements
Emphasizes using specific cables and following manufacturer instructions for network connectivity.
Media Converter Switch Operation Notes
Notes that the switch does not support hotswapping; power must be disconnected.
Connector Descriptions
Details DC input/output, RJ45, SFP, and internal network connectors.
I/O Connector Functionality
Describes the 6-pin I/O connector for digital input/output and alarm integration.
Product Specifications
Operating Conditions
Specifies operating temperature (-30°C to 50°C) and humidity (10-100% RH).
Power Consumption Details
Lists power requirements (12V DC, max 60W) and notes on limited power sources.
SD Card Slot Support
Supports SD cards up to 64 GB; recommends SDHC/SDXC with speed class 10.
Media Converter Switch Connector Details
DC Input Connector Specifications
Details the 2-pin terminal block for DC power input, including ground and voltage specifications.
DC Output Connector Specifications
Describes the 2-pin terminal blocks for DC power output to the camera.
Internal Network Connector Details
Details the two 2-pin Ethernet terminal blocks for internal network connections.
Hardware Installation Procedures
I/O Connector Setup
Configuration details for external and internal I/O terminal connectors.
Installation Best Practices
Covers cable connections, mounting orientation, and careful handling of the dome cover.
Camera Component Procedures
Sunshield and Dome Cover Installation
Instructions for attaching the sunshield and replacing the dome cover.
SD Card Installation for Recording
Steps for installing an SD card for local storage and recording.
Camera Pressurization
Nitrogen Filling Procedure
Steps for filling the camera housing with nitrogen gas to prevent condensation.
Power Supply and Switch Installation
Power Supply and Switch Functionality
Explains the media converter switch enables power delivery and data communication.
Media Converter Switch Installation
Installation Precautions
Advises professional installation of mains supply, protected environment for switch, and correct cable usage.
Mounting the Switch and Cable Preparation
Steps for mounting the switch and preparing the multi-connector cable jacket.
Multi-Connector Cable Preparation
Shielding and Jacket Stripping Procedures
Detailed steps for preparing the multi-connector cable, including cutting shields and stripping wire jackets.
Wire Connections and Routing
Wire Identification and Function
Identifies wires by color and function: power, I/O, Ethernet, GND, shields.
Internal Connector Connections
Instructions for connecting network/I/O wires to internal connectors and ground/power wires to the power connector.
Internal Component Connections
Wire and Connector Mapping
Details connections for power wires, Ethernet wires, I/O wires, and ground to respective connectors.
Shielding and Clamping Procedure
Describes securing the braided shield coil with a clamp and ground clip.
Grounding and Network Connections
Clamp and Grounding Procedure
Ensures clamp is in place, shields contact clamp for grounding, and jacket is secure.
Network Cable Connection
Connects network cables (RJ45, SFP) as required, noting SFP module for optical fiber.
I/O and Network Device Configuration
I/O Device Connection and Power Wiring
Connects I/O device, power cable, and ground wire to appropriate terminals.
Media Converter Dip Switch Settings
Explains dip switch settings for daisy-chaining switches or direct network connection.
Network Camera Installation
Bracket Installation and Cable Routing
Install bracket, route multi-connector cable through holes, and secure camera with safety wire.
Camera Mounting Procedure
Multi-connector Cable Connection
Remove protection cap, connect multi-connector cable using alignment indicators.
Camera Flange Alignment and Fastening
Align guide hole with guide pin and fasten camera to mounting bracket with screws.
Product Access and Reset
Accessing the Product Features
Use software CD tools to assign IP address, set password, and access video stream.
Factory Reset Procedures
Caution on resetting parameters to factory default via web interface or control button.
Factory Reset and Additional Information
Factory Default Reset Procedures
Details methods for resetting the product to factory defaults, including IP address changes.
Further Information Resources
Guidance on accessing the User Manual, firmware updates, and learning resources.
Warranty Information Access
Information on how to find details about the product warranty.
Need help?
Do you have a question about the Q6045-S PTZ and is the answer not in the manual?
Questions and answers