HP DL320s - ProLiant 9TB SATA Storage Server NAS Release Notes page 6

Workaround If the volume has existing quotas, recover the volume from backup. If the volume
Issue:
After installing a Multilingual User Interface (MUI), the HP Storage Server Management console
might incorrectly display unsupported MMC snap-ins
Description
Workaround There are two workarounds for this issue:
Issue:
Creating quotas on a newly-installed cluster might cause File Server Resource Manger to fail
with an unexpected error
Description
Workaround
Configuration
This section provides additional information on configuring your storage server.
Issue:
DL320s hardware RAID configuration omitted from documentation
Description
Workaround The hardware RAID configuration for the DL320s is as follows:
Additional applications and utilities
This section provides additional information on using certain applications and utilities on the storage
server.
6
HP Storage Server Management console user interface
does not have existing quotas, use an Administrator login to rename the <Drive
Letter>:\System Volume Information\SRM\quota.xml file and try to
create the quotas again. Recover from backup if the creation continues to fail.
On the first reboot after installing a new MUI from the HP Localization Kit onto an
HP ProLiant Storage Server, the HP Storage Server Management console might
display the Data Protection and Clustered Gateway Management MMC snap-ins,
which are not supported.
• Reboot the server.
or
1. Close the HP Storage Server Management console.
2.
Restart the HP Storage Server Management service.
3.
Reopen the HP Storage Server Management console.
After creating a cluster, if you try to create a quota using the HP Storage Server
Management console (Storage Management > Share and Storage Management
> File Server Resource Manager > Quota Management > Quotas), the Quota
Creation window might not open, the File Server Resource Manager will fail with
the message An unexpected error occurred, and an entry will be added
to the event logs.
1.
Close the HP Storage Server Management console.
2. Restart the File Server Resource Manager service.
3. Reopen the HP Storage Server Management console.
Configuration
The hardware RAID configuration information for the DL320s model was omitted
from the HP ProLiant Storage Server User Guide.
• Logical Disk 1 — Operating System Volume, RAID 1, Physical Drives 0–1
• Logical Disk 2 — DON'T ERASE Volume, RAID 1, Physical Drives 0–1
• Logical Disk 3 – n — Data Volume, RAID 5 (SAS models) RAID 6 (SATA
models), Physical Drives 2–11