Sas/Sata Hard Drive Leds; Sas And Sata Hard Drive Led Combinations - HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server User Manual

Figure 11 SAS/SATA hard drive LEDs
Table 15 SAS and SATA hard drive LED combinations
1. Fault/UID LED
(amber/blue)
Alternating amber and blue
Steadily blue
Amber, flashing regularly (1
Hz)
Off
Amber, flashing regularly (1
Hz)
Off
Amber, flashing regularly (1
Hz)
Off
Steadily amber
46 Storage system components
2. Online/activity LED
(green)
On, off, or flashing
On, off, or flashing
On
On
Flashing regularly (1 Hz)
Flashing regularly (1 Hz)
Flashing irregularly
Flashing irregularly
Off
Status
The drive has failed, or a predictive failure alert has
been received for this drive; it also has been selected
by a management application.
The drive is operating normally, and it has been
selected by a management application.
A predictive failure alert has been received for this
drive. Replace the drive as soon as possible.
The drive is online, but it is not active currently.
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is part of an array that is undergoing
capacity expansion or stripe migration, but a
predictive failure alert has been received for this
drive. To minimize the risk of data loss, do not
replace the drive until the expansion or migration is
complete.
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is rebuilding, or it is part of an array that
is undergoing capacity expansion or stripe
migration.
The drive is active, but a predictive failure alert has
been received for this drive. Replace the drive as
soon as possible.
The drive is active, and it is operating normally.
A critical fault condition has been identified for this
drive, and the controller has placed it offline.
Replace the drive as soon as possible.