Recovering From Logical Disk Failure - HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server User Manual

Object
iSCSI Target
System level

Recovering from logical disk failure

Application component or shared folder data stored on a logical disk that failed is lost. To recover
the data and reallocate storage on your HP All-in-One Storage System, replace any failed hard drives,
allocate new storage on your HP All-in-One Storage System using a storage-allocation wizard to
replace the lost storage, and then restore the data to the new allocated storage using a backup (see
"Restoring data from
130 Troubleshooting, servicing, and maintenance
Alert text Description
The replication
license state
for this system
could not be
determined.
iSCSI Target
Software not
running or not
of minimum
version.
iSCSI LUN
contains
Each iSCSI LUN most
multiple host
contain only one
references.
reference to one iSCSI
Multiple hosts
initiator.
are not
supported.
iSCSI LUN not
connected to
host.
ASM found an iSCSI
iSCSI LUN not
LUN that is not
associated
associated with any
with a host.
host.
This system's
name
<hostname>
cannot be
resolved to a
fully qualified
domain name.
Please check
the DNS
configuration
for this system
or the DNS
server
configuration.
backups" on page 91).
Possible cause Solution
An invalid license key Obtain a valid license key
was entered for and use the SWSM
StorageWorks Management Console to
Storage Mirroring. enter the new license key.
ASM requires
Microsoft iSCSI Target
version 3.1 or greater.
Manually remove the
multiple instances so that
only one host is connected
to this iSCSI LUN.
On the affected host, use
the iSCSI Initiator software
to reconnect to this iSCSI
LUN.
Associate a host for this
iSCSI LUN using the iSCSI
Target software on the
All-in-One Storage System.
The DNS domain that
the AiO is in is not
Contact the DNS
properly configured or
administrator.
the AiO DNS settings
are incorrect.