Alert Descriptions - HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server User Manual

The following table lists all possible ASM alerts and provides descriptions, possible causes, and
solutions for each alert.
Table 49 Alert descriptions
Object Alert text
Any
application
Directory size
component,
cannot be
user-defined
determined.
application, or
shared folder
Used space
has exceeded
its X% warning
threshold.
Directory path
cannot be
found.
Storage has
reached its
allocated
space.
Backup
capability is
not usable.
Description Possible cause
Directory permission
is preventing ASM
from determining the
Used space cannot be used space or the
determined. logical disk has failed.
An alert will be issued
for the logical disk if it
has failed.
The percent of used
space exceeds the
Used space is about percent full warning
to surpass the percent threshold or the
full warning threshold logical disk has failed.
(X%). An alert will be issued
for the logical disk if it
has failed.
Path assigned to
allocated storage has
Allocated storage
been changed or the
space cannot be
logical disk has failed.
located. Volume is
An alert will be issued
intact.
for the logical disk if it
has failed.
No more data can be
saved to the allocated Used storage has
storage space. 100 reached the total
percent of allocated allocated space.
storage is used.
A supported version
Data Protector Express
of the integrated Data
has been uninstalled
Protector Express
or upgraded to an
software was not
unsupported version.
found.
HP StorageWorks All-in-One Storage System
Solution
Change directory
permissions back to
default permissions set by
ASM. If the logical disk
has failed, see
"Recovering from logical
disk failure" on page 130.
Increase the percent full
warning threshold (see
Setting a percent full
warning
threshold on page 80) or
increase the allocated
storage (see "Increasing
or reducing the allocated
storage" on page 97).If
the logical disk has failed,
see "Recovering from
logical disk
failure" on page 130.
Change path to allocated
storage back to path
assigned by ASM.If the
logical disk has failed, see
"Recovering from logical
disk failure" on page 130.
Increase the allocated
space or delete data to
reduce used storage. See
"Increasing or reducing
the allocated
storage" on page 97 for
more information.
Reinstall the product using
the supported Data
Protector Express version
located at
C:\hpnas\components\DPX.
After reinstalling, run the
AddAsmBackupUser.cmd
file from the same
location.
123