Lexmark 4600 Quick Reference Manual page 2

Cleaning or replacing the pick
roller
Clean the pick roller on a regular basis to ensure that
the ADF feeds paper properly. Replace the pick roller
when needed.
1
Open the ADF cover.
2
Press down on the pick roller release lever.
3
Pull down on the pick roller, and then remove it.
4
If you are cleaning the pick roller, dampen a
clean, lint-free cloth or paper towel with 91% or
greater Isopropyl Alcohol, and then wipe the
pick roller.
5
If you are replacing the pick roller, unpackage
the replacement pick roller.
6
Insert the cleaned or replacement pick roller,
and then push up on it to lock it into place.
7
Press up on the pick roller release lever to lock
it.
8
Close the ADF cover.
Cleaning or replacing the pick pad
Clean the pick pad on a regular basis to ensure that
the ADF feeds paper properly. Replace the pick pad
when needed.
1
Open the ADF cover.
2
Remove the pick pad.
3
If you are cleaning the pick pad, dampen a
clean, lint-free cloth or paper towel with 91% or
greater Isopropyl Alcohol, and then wipe the
pick pad by moving the cloth or paper towel
from side to side.
4
If you are replacing the pick pad, unpackage the
replacement pick pad.
5
Insert the cleaned or replacement pick pad.
6
Click the pick pad into place.
7
Close the ADF cover.