Advertisement

HRV 2500*
HR 2.5*
VB0064
NOTES: 1. HRV 2500* and HR 2.5* models are available in Canada only.
2. HEPA 4000* model is available in United States only.
*Patents pending
HOMEOWNER: USE AND CARE INFORMATION ON PAGES 18 TO 20.

INSTALLATION INSTRUCTIONS

AND USER MANUAL
RESIDENTIAL USE ONLY
READ AND SAVE THESE INSTRUCTIONS
INSTALLER: LEAVE THIS MANUAL WITH THE HOMEOWNER.
M O D E L S
HEPA 4000*
HEPA 3000*
HF 3.0*
04313
rev. F

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HEPA 3000 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Typical Installations
Stand Alone Installation
Describes a specific installation method for HRV/HR units with diagrams.
Central Draw Point Installation
Explains connecting units to a forced air system using diagrams.
Return-to-Return Installation
Details the return-to-return installation method with diagrams.
Geographical Location for HEPA 4000
Discusses HEPA 4000 unit placement based on location using a map.
HEPA 4000 Attic Installation
Details attic installation for the HEPA 4000 model with diagrams.
Dimensions
HRV 2500 and HR 2.5 Units Dimensions
Provides physical dimensions for specific HRV/HR models with diagrams.
HEPA 3000, HF 3.0 and HEPA 4000 Units Dimensions
Lists dimensions for HEPA/HF models with diagrams.
Mounting and Servicing Considerations
Details clearance and Tandem transition requirements with diagrams.
Before Starting
Inspect the Contents of the Box
Guide to checking unit components for damage or missing parts.
Tools, Materials and Installation Kits
Lists necessary tools, materials, and specific installation kits.
Locating the Unit
Provides criteria for choosing an appropriate installation location.
Install the Unit
Mount the Ports on the Unit
Instructions for attaching the unit's ports using screws.
How to Hang the Unit
Details on hanging the unit using chains and springs.
Planning of the Ductwork
Guidance on planning ductwork for optimal airflow and minimum bends.
Installing Non-Insulated Ducts and Registers
Steps for installing non-insulated ducts and registers, including types.
Installing Insulated Flexible Ducts
Procedures for connecting insulated flexible ducts to transitions and ports.
Installing Dual Exterior Hood
Covers assembly, location, and connection of the dual exterior hood.
Connecting the Drain
Steps for connecting the unit's drain and creating a water trap.
Controls
Main Switch
Describes the 3-position main switch on the unit's front panel.
Wall Control
Introduces the C34 and CMR wall control options.
Operating C34 / CMR Control
Explains the function of the C34/CMR control and its indicators.
Maintenance
Biannual Maintenance (Essential)
Step-by-step guide for essential biannual maintenance tasks.
Annual Maintenance (Essential)
Instructions for essential annual maintenance procedures.
Master Reset (C34 / CMR Controls)
How to perform a master reset for the wall controls.

Table of Contents

Save PDF