Lexicon 300L - REV 1 Owner's Manual page 73

300L Owner's Manual
Random Ambience
Parameters
RT*
.24-64.17SEC OFF, -48TO-1DB, UP FULL
SPN
0-48 0 S-37.1MS
* Parameter range is dependent on setting of SIZ.
** Parameter range is dependent on setting of Sample Rate.
L
Diffusion
R
RT (Reverb Time)
RVL (Reverb Level)
SIZ (Size)
ROL (Hi Freq Rolloff)
4-10
RVL SIZ
4.0-39.4M
WAN DDLY
0-99.877MS
D Delay
Predelay
D Delay
Random Ambience Page One
This control adjusts the reverberation time of the independent reverberator. The
range of action is limited. Be careful — both long and short reverb times may
sound unnatural. If a much longer or shorter reverb time than the preset provides
is desired, SIZ should be changed first.
RVL sets the amount of reverberation in the processed signal. It should normally
be set between -6 and -12dB.
SIZ allows you to vary the apparent size of the space over a wide range. SIZ is
the most dramatic control, and must be selected to match the music or program
material. It should be the first control that you adjust to tailor the desired space.
SIZ also affects the reverb time, in a similar way to the standard reverb programs.
ROL sets the frequency above which a 6 dB/octave low-pass filter attenuates the
processed signal. High frequencies are often rolled off with this parameter,
resulting in a more natural sounding acoustic space.
PAGE ONE
ROL
0.5KHZ-21.2KHZ
PAGE TWO
Ambience Generator
SIZ RTM RLVL
SPN WAN
Lexicon
DIF PDLY**
0-99 0-99.877MS
Rolloff