M
M
EMORY
S
I
All memories can store an independent transmit frequency, for operation on repeaters
with non-standard shift. To do this:
1. Store the receive frequency using the method already described under M
(it doesn't matter if a repeater offset is active).
2. Tune to the desired transmit frequency, then press and hold in the
second.
3. Within five seconds of releasing the
memory channel number as used in step "1" above.
4. Press and hold in the PTT switch, then briefly press the
holding the PTT switch in (this does not key the transmitter).
Whenever you recall a memory, which contains in-
dependently-stored transmit and receive frequen-
cies, the "
1. While operating in the VFO mode, press the
enter the Memory mode.
2. Rotate the DIAL knob to select the desired channel.
3. If you press the
the memory channel will be selected in 10 channels per step.
4. To return to the VFO mode, press the
1 ) When the radio is already set to the Memory mode, an easy way to recall
memories is to key in the memory channel number, then press the
For example, to recall memory channel #14, press
2) You may change the step of the fast channel selection mode (
via Set Mode Item 52: MEMORY FAST STEP. See page 151 for details.
48
ODE R
M
T
" indication will appear in the display.
M
key briefly, then rotate the DIAL knob,
M
C
S
F
"O
key, rotate the DIAL knob to select the same
R
key to
key.
VX-8DR O
O
S
"
S
key for 1/2
key once more while
.
key + DIAL knob )
M
-
key.