Vox Operation - Verterx Standard VXA-300 PILOT III Operating Manual

VOX Operation

If you want to have both hands free, use the (user-sup-
plied) Headset and activate the VOX (voice-actuated trans-
mit/receive switching) system.
Note: The VOX system does not function when using just
the internal microphone; an external headset must be used.
To activate the VOX system using the Menu System:
Press the [ F ] key, then press the VOLUME knob to
activate the Menu ("SET") mode.
Rotate the DIAL selector knob
to select Menu Item 21 "VOX
Press the VOLUME knob to
enable adjustment of this
Menu item.
Rotate the DIAL selector knob to select "on
able the VOX system).
When you have made your selection, press the VOL-
UME knob to save the new setting, and then press the
PTT switch to exit to normal operation.
Without pressing the PTT switch, speak into the mi-
crophone in a normal voice level. When you start
speaking, the transmitter should be activated automati-
cally. When you finish speaking, the transceiver should
return to the receive mode (after a short delay).
VXA-300 P III O
ILOT
A
DVANCED
VOX." VOX VOX VOX
on on" (to en-
on on
M
PERATING ANUAL
O
PERATION
To cancel VOX and return to PTT operation, just repeat
the above procedures, selecting "oFF
When the VOX system is activated,
the " " icon will appear on the
display.
The VXA-300 provides for adjustment of the VOX Gain
via the Menu, to prevent accidental transmitter activation
in a noisy environment. To set the VOX Gain:
Press the [ F ] key, then press the VOLUME knob to
activate the Menu ("SET") mode.
Rotate the DIAL selector knob
to select Menu Item 23
"VSNS
VSNS." VSNS VSNS VSNS
Press the VOLUME knob to
enable adjustment of this Menu item.
While speaking into the microphone, rotate the DIAL
selector knob to the point where the transmitter is
quickly activated by your voice, without causing back-
ground noise to activate the transmitter.
When you have selected the optimum setting, press
the VOLUME knob to save the new setting, and then
press the PTT switch to exit to normal operation.
oFF" in step 4 above.
oFF oFF oFF
23