Priority Dual Watch Operation - Verterx Standard VXA-300 PILOT III Operating Manual

Similar to Dual Watch operation (described on previous
page), Priority Dual Watch is an enhanced version which
includes the following additional features:
The receiving time interval (ratio) between the cur-
rent channel and the Priority channel may be custom-
ized via Menu Item 09 "PRTM
tails.
Irrespective of which channel is currently being re-
ceived, when the PTT button is pushed transmission
will always occur on the Priority channel.
Before initiating Priority Dual Watch, Menu Item 10
"DWMD DWMD" must be set to the "PRI
DWMD DWMD DWMD
of "DW DW: Dual Watch"). See page 48 for details.
DW DW DW
To start Priority Dual
Watch, press the [ F] key
momentarily, then press
the [ SCAN ( DW )] . The
" " icon will appear
on the display.
While receiving on the
"current" (non-Priority) chan-
nel, pressing the PTT button
once causes the radio to switch
to the Priority channel and can-
VXA-300 P III O
ILOT
P D
RIORITY UAL
PRTM." See page 47 for de-
PRTM PRTM PRTM
PRI: Priority" mode (instead
PRI PRI PRI
M
PERATING ANUAL
W O
ATCH PERATION
cels Dual Watch. Press the PTT button again to trans-
mit on the Priority channel.
When a signal is received on the Priority channel, re-
ception immediately shifts to the Priority channel, the
" " icon will blink, and the display will become
illuminated unless the Scan Lamp Feature is turned
off.
While receiving on the priority channel, if you mo-
mentarily press the PTT button, Priority Dual Watch
will be disabled. You may then transmit on the Prior-
ity Channel.
To stop Priority Dual Watch, press [ F ] [ SCAN ( DW )] .
33