Yaesu VX-170 - APRS Manual page 51

cess code ("#123").
Press and hold in the [ F ] key for one second to save the
I.
setting.
2. Press the PTT switch to exit to normal operation.
3. Press the [ F ] key, then press the [ 0 ( SET )] key to enter the Set mode again.
4. Rotate the DIAL knob to select Set Mode Item 22:
5. Press the [ F ] key to enable adjustment of this Set Mode Item.
6. Rotate the DIAL knob to set this Set Mode Item to "
(thus activating the "Other Internet Link System" mode).
7. Press the PTT switch to save the new settings.
8. Press the [ 0 ( SET )] key momentarily to activate the Internet Con-
nection feature. The "
corner of the display.
9. Press and hold in the [ 0 ( SET )] key for one second, rotate the
DIAL knob to select the DTMF access number ("
" IMEM 9 IMEM 9 IMEM 9 ") corresponding to the Internet link repeater to which
IMEM 9 IMEM 9
you wish to establish an Internet link, then press the PTT switch
momentarily to lock in the selected access number.
10. Once the Internet Connection feature is activated per step 8 above,
you may now press the [ 0 ( SET )] key, while you are transmitting, to send out the
selected DTMF string (to establish the link to the desired Internet-link mode).
To return to the WIRES™ mode, repeat steps 3 - 6 above, selecting "
VX-170 O
PERATING
I
NTERNET
" icon will appear in the upper right
M
ANUAL
C
ONNECTION FEATURE
I NET I NET
I NET I NET I NET .
INT.MEM INT.MEM INT.MEM INT.MEM INT.MEM "
IMEM 1 IMEM 1
IMEM 1 IMEM 1 IMEM 1 " ~
INT.COD INT.COD
INT.COD INT.COD INT.COD
" in step 6.
49