Advertisement
The FIX mode is convenient when you want to monitor an entire amateur band.
The starting point, located at the left edge of the screen, can be set for each amateur band via FT
1.8 FIX
1.8 FIX
141 SCP 50.0 FIX
141 SCP 50.0 FIX
1.8 FIX" ~ 141 SCP 50.0 FIX
1.8 FIX
1.8 FIX
141 SCP 50.0 FIX
141 SCP 50.0 FIX"). Even if the screen span (bandwidth) is changed, the start frequency will not be changed. By
watching the screen, you can move your operation to a clear channel or find frequencies where interesting activity appears on the
display.
1. Press and hold the FT
DX
engage the Scope Menu mode.
The SUB DISPLAY-
I window will show the Group name
SCOPE
SCOPE
SCOPE), while the SUB DISPLAY-
SCOPE
(SCOPE
the Menu item. The SUB DISPLAY-
the setting of the currently-selected Menu item.
2. Rotate the ( VFO-A )[ SELECT ] knob to select the Menu
MODE
MODE
MODE".
MODE
item "MODE
3. Rotate the ( VFO-B )[ SELECT ] knob to select "FIX
The current VFO-A frequency is indicated on the screen
by a bold vertical line, for ease of status recognition.
4. Rotate the ( VFO-A )[ SELECT ] knob to select the Menu
SPAN
SPAN
SPAN", then rotate the ( VFO-B )[ SELECT ] knob
SPAN
item "SPAN
to select the desired frequency span to monitor.
Available selections are: 25 kHz
kHz
kHz
kHz
kHz
kHz, 500 kHz
500 kHz
500 kHz
500 kHz, 1000 kHz
500 kHz
1000 kHz
1000 kHz
1000 kHz, and 2500 kHz
1000 kHz
5. Rotate the ( VFO-A )[ SELECT ] knob to select the Menu item
ATT", then rotate the ( VFO-B )[ SELECT ] knob to select
ATT
ATT
ATT
"ATT
the display attenuation value according to current propaga-
tion conditions, your operating frequency, and antenna, etc.
Available selections are: 0 dB
6. Press the [ C.S ] key briefly to save the new setting and
exit to normal operation.
A
:
DVICE
If the VFO-A frequency is outside of the spectrum shown on
the screen, the operating frequency will be "shown" in the
lower area of the display as "
U
SING THE
5000 [ C.S ] key for 2 seconds to
II window will show
III window shows
FIX
FIX
FIX
FIX".
25 kHz
25 kHz
50 kHz
50 kHz
100 kHz
100 kHz
25 kHz
25 kHz, 50 kHz
50 kHz, 100 kHz
50 kHz
100 kHz
100 kHz, 250
2500 kHz
2500 kHz
2500 kHz
2500 kHz.
0 dB
0 dB, 10 dB
0 dB
0 dB
10 dB, and 20 dB
10 dB
10 dB
10 dB
20 dB
20 dB
20 dB
20 dB.
<<< <<< <<< <<< <<<
>>> >>> >>> >>> >>>
" or "
".
FIX ( F
) M
IXED
ODE
Current VFO-A Frequency
250
250
250
250
-5-
131 SCP
131 SCP
5000 Menu items ("131 SCP
131 SCP
131 SCP
DX
[ C.S ] Switch
( VFO-A )[ SELECT ] Knob
( VFO-B )[ SELECT ] Knob
OPERATING Mode
TRACE Mode
NOR: Normal
AVG: Average
PEAK: Peak Hold
FIX
Advertisement
