HP 9000 V2500 Firmware Update Manual
HP 9000 V2500 Firmware Update Manual

HP 9000 V2500 Firmware Update Manual

Hp integrity servers and hp 9000 servers firmware update options

Advertisement

HP Integrity Servers and HP 9000 Servers
Firmware Update Options
HP Part Number: 5900-2655
Published: March 2013
Edition: 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9000 V2500 and is the answer not in the manual?

Questions and answers

Summarization of Contents

HP Integrity and HP 9000 Firmware Update Solutions
HP Integrity Systems
Lists HP Integrity systems and their supported firmware update options.
HP 9000
Lists HP 9000 systems and their supported firmware update options.
HP FM
HP OSIFM
Details HP OS Initiated Firmware (HP OSIFM) for OS-dependent firmware installation.
HP OFM
Details HP Offline Firmware Manager (HP OFM) for OS-independent firmware updates.
Additional Firmware Installation Options
EFI Image
Describes the EFI image solution for offline firmware updates on pre-2010 HP Integrity systems.
iLO 3
Explains firmware updates using the iLO 3 management processor for newer systems.
MP-Initiated
Details MP-initiated firmware updates for pre-2010 cellular systems.
Frequently Asked Questions
How can I be notified when new firmware packages are available?
Explains how to subscribe to email notifications for new firmware package availability.
Where can I download firmware packages?
Provides guidance on locating and downloading specific firmware packages from the HP website.
How can I view the firmware version installed on my system?
Describes methods for checking the currently installed firmware versions on a system.
When is a power down and reboot required after updating firmware?
Clarifies the conditions under which a system reboot is necessary after firmware updates.
A Updating Firmware Using iLO 3
Files to use to update through iLO3
Lists the required firmware files that must be extracted from the bundle for iLO 3 updates.
How to update firmware through iLO 3
Provides the procedure for performing firmware updates using the iLO 3 CLI or web interface.

Table of Contents