Channel Step Selection; Display Brightness - Yaesu FT-2900R Operating Manual

Tuning steps are factory preset to default increments which are appropriate for the country
to which this radio is exported. You may have a reason to use a different step size, however,
and here is the procedure for changing the channel steps:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "50 STEP
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
select the desired step size (5 5 5 5 5 /10
kHz).
3. Press and hold in the [ MHz ( SET )] key for one second to save your new setting and exit
to normal operation.
The FT-2900R display illumination has been specially engineered to provide high visibil-
ity with minimal disruption of your "night vision" while you are driving. The brightness of
the display is manually adjustable, using the following procedure:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "16 DIMMER
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
select a comfortable brightness level (LVL 0
3. Press and hold in the [ MHz ( SET )] key for one second to
save your new setting and exit to normal operation.
FT-2900R O
PERATING
A
C S
HANNEL TEP
50 STEP 50 STEP
50 STEP." 50 STEP
10 10/12.5 10 10 12.5 12.5 12.5 12.5/15 15 15 15/20 15
D B
ISPLAY
16 DIMMER." 16 DIMMER 16 DIMMER 16 DIMMER
LVL 0 - LVL10
LVL 0 LVL 0
LVL 0
M
ANUAL
DVANCED
S
ELECTION
20/25 20 20 20 25 25 25/50 25 50 50 50 50/100 100 100 100 100
RIGHTNESS
LVL10). LVL10 LVL10
LVL10
O
PERATION
19