Table of Contents
Advertisement
Memory-Memory mode
Store a frequency that you want to use as the Dual Watch "Priority" channel into memory
"1 1 1 1 1 ."
Set the radio to the Memory mode by pressing the [ MR/MW ( SKIP ) ] key.
Rotate the DIAL to select the channel on which you wish to operate while periodically
checking for activity on channel "1" during Dual Watch operation.
Press the [ F/L ] key momentarily (not for 1/2 second), then press the [ VFO ( PRI ) ] key
(momentarily). A small "PRI" notation will appear on the LCD.
VFO-VFO mode
Press the [ VFO ( PRI ) ] key to switch to the VFO mode, if needed.
Press the [ F/L ] key, then press and hold in the [ VFO ( PRI ) ] key.
The FT-250R will now periodically change from the VFO-A frequency to the VFO-B
frequency, checking for activity on VFO-B for 0.2 second.
The FT-250R's 16-button keypad allows easy DTMF dialing for Autopatch or repeater
control purposes. Besides numerical digits [ 0 ] through [ 9 ] , the keypad includes the [ ]
and [ # ] digits, plus the [ A ] , [ B ] , [ C ] , and [ D ] tones often used for repeater control.
FT-250R O
PERATING
M
ANUAL
Scanning
25
Hide quick links:
Advertisement
Table of Contents
