Set Mode - Yaesu FT-250R Operating Manual

Set Mode

The FT-250R Set (Menu) mode is easy to activate and set. Use the following procedure:
Press the [ F/L ] key, then press the [ 0 ( SET ) ] key, to activate the Set mode.
Turn the DIAL to select the Menu item number to be adjusted.
Press the [ F/L ] key momentarily, then rotate the DIAL to adjust or select the parameter
to be changed on the Menu item selected in above step.
After completing your selection and adjustment, press the PTT switch momentarily to
exit the Set mode and exit to normal operation.
Item # Menu Item
1 ALPHA Store Alpha-Numeric "Tags"
2 ARS Enable/disable Automatic Repeater Shift
3 RPT Set the Repeater Shift Direction
4 SHIFT Set the magnitude of the Repeater Shift
5 V-SPLIT Enable/disable "VFO Split" Operation
6 STEP Setting of the synthesizer steps
7 RESUME Select the Scan Resume mode
8 SCN LMP Enable/disable the Scan lamp
9 RX SAVE Select the Rx-mode Battery Saver interval
10 TX SAVE Enable/disable the Transmit Battery Saver
11 APO Set the Automatic Power-Off time
12 TRX LED Enable/disable the BUSY/TX LED
13 ARTS Activate ARTS operation
14 ARTS BP Select the Beep option during ARTS operation
Select the Polling Interval during ARTS opera-
15 AR ITVL
tion
16 KEY BP Enable/disable the Keypad beeper
17 EDGE BP Enable/disable the Band-edge beeper
18 BELL Select the CTCSS Bell ringer repetitions
19 MON/TCL Select the MON key function
20 REV/HM Select the function of [REV(HM)] key
21 LMP MOD Select the LCD/Keypad Lamp mode
22 TOT Set the TOT time
Enable/disable the Busy Channel Lock-out fea-
23 BCLO
ture
24 CLK SFT Shifting of the CPU clock frequency
25 SQL TYP Select the Tone Encoder and/or Decoder mode
26 TN SET Setting of the CTCSS Tone Frequency
27 DCS SET Setting of the DCS code
28 DTMF Programming the DTMF Autodialer
29 CW ID Programming/activation of the CW Ider
30 S SRCH Activate the Smart Search
31 SMT MOD Select the Smart Search Sweep mode
32 LK MODE Select the Control Locking lockout combination
33 NAR/WID Select the Operating band width
34 DTMF SP Select the DTMF Autodialer sending speed
32
Set Mode Summary
Function Available Values
–
ON/OFF
-RPT/SIMP/+RPT
0 - 99.9MHz
ON/OFF
5/10/12.5/15/20/25/50 kHz
5SEC/BUSY/HOLD
ON/OFF
OFF/200ms/300ms/500ms/1s/2s
ON/OFF
OFF/30min/1h/3h/5h/8h
ON/OFF
–
OFF/INRANGE/ALWAYS
15 SEC/25 SEC
ON/OFF
ON/OFF
OFF/1/3/5/8/REPEAT
MON/T-CALL
REV/HOME
KEY/5SEC/TOGGLE
OFF/1min/2.5min/5min/10min
ON/OFF
ON/OFF
OFF/TONE/TONESQL/DCS
39 Standard CTCSS tones
104 standard DCS codes
–
–
–
SINGLE/CONTINUE
KEY/DIAL/KEY+DIAL/PTT/
KEY+PTT/DIAL+PTT/ALL
NARROW/WIDE
50 ms/100 ms
FT-250R O
PERATING
Default
–
ON
SIMP
0.6MHz
OFF
5SEC
ON
200ms
OFF
OFF
ON
–
INRANGE
15 SEC
ON
ON
OFF
REV
KEY
OFF
OFF
OFF
OFF
100 Hz
023
–
–
–
SINGLE
KEY
WIDE
50 ms
M
ANUAL