Toshiba 22SL738G Owner's Manual
Toshiba 22SL738G Owner's Manual

Toshiba 22SL738G Owner's Manual

Digital series
Table of Contents

Advertisement

19/22/26/32/42
SL738G
DIGITAL Series

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 22SL738G and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Precautions
Air Circulation
Proper ventilation is needed to prevent overheating.
Heat Damage
Avoid direct sunlight and high temperatures to prevent damage.
Mains Supply
Connect to specified AC voltage and use the supplied lead.
Installation and Important Information
Where to Install
Locate the TV away from direct sunlight and on a stable surface.
Connecting External Equipment
Aerial Cables
Connect the aerial cable to the ANT socket on the rear of the TV.
SCART Leads
Connect video recorder/decoder to TV using SCART leads.
Connecting HDMI or DVI Device
To Connect an HDMI Device
Connect an HDMI cable (Type A) to the HDMI terminal for video and audio.
To Connect a DVI Device
Connect an HDMI-to-DVI adapter cable and audio cables to HDMI1.
Connecting a Computer
To Connect PC to HDMI Terminal
Use an HDMI-to-DVI adapter cable and audio cables for PC connection.
Using the Controls
Switching On
Connect aerial, select TV input, then power on.
Using the Remote Control
Use the on-screen menus via the remote control for setup.
Using Side-Panel Controls
Use buttons on the TV for volume, programme, and menu navigation.
Using the Touch Sensor
Operate volume, programme, and menus using touch-sensitive buttons.
Tuning the Television
Initial Setup Wizard
Guides through country, language, and mode selection.
Auto Scan
Re-tunes the TV and updates the channel list.
Single RF Scan
Scan individual RF channels and check signal strength.
Update Scan
Search for new channels not in the programme list.
Favorite Network Select
Select preferred network if multiple are detected.
Analogue Manual Scan
Manually tune channels for analogue TV reception.
Channel Skip and Sort
Skip or reorder channels in the programme list.
Channel Edit and Decode
Modify channel details and decode specific channels.
Analogue Fine Tune and Clean List
Adjust analogue channels and clear the list.
Common Interface
Use common interface for conditional access modules.
Reset TV
Reset all TV settings to factory defaults.
Automatic Power Down
TV automatically turns off after a period of inactivity.
General Controls
Selecting Programme Positions
Select programmes using numbered buttons or navigation keys.
Time Display
Display current time from broadcaster during analogue TV.
Stereo and Bilingual Transmissions
Shows icons for stereo/dual language broadcasts.
Sound Controls
Volume Control
Adjust volume level using remote control buttons.
Sound Mute
Turn sound on/off.
Balance, Bass, Treble
Adjust audio balance and tone settings.
Surround Sound
Enhances sound quality with expanding and deepening effects.
Stable Sound
Reduces volume level differences between channels.
Bass Boost
Enhances depth of sound on TV speakers.
Bass Boost Level
Adjusts the level of bass boost.
Audio Description
Provides narration for visually impaired viewers.
Visually Impaired (Audio Description Volume)
Adjust volume for audio description when set to Visually Impaired.
Advanced Audio Settings
Create enhanced surround sound with deep, rich bass.
Widescreen Viewing
Native Viewing Mode
Show picture without over scan via HDMI.
Wide Viewing Mode
View widescreen DVD/video tape or 16:9 broadcast.
Cinema Viewing Mode
Zoom to eliminate black bars for "all sides panel format" films.
4:3 Viewing Mode
View true 4:3 broadcast.
Super Live Viewing Mode
Enlarge 4:3 image to fit screen, stretching horizontally/vertically.
Subtitle Viewing Mode
Raise picture to display all text for letterbox format.
14:9 Viewing Mode
View 14:9 broadcast.
PC Wide Viewing Mode
Display PC image without clipping via HDMI/RGB/PC.
PC Normal Viewing Mode
Display PC image correctly via HDMI/RGB/PC.
Dot by Dot Viewing Mode
Non-scaling display showing original pixel format.
Picture Controls
Picture Mode Settings
Adjust picture appearance using preset modes.
Brightness, Contrast, Colour, Tint
Adjust brightness, contrast, colour, and tint levels.
Sharpness Adjustment
Increase or decrease picture sharpness.
Back Light Adjustment
Adjust backlight for screen clarity.
Colour Temperature Adjustment
Adjust warmth or coolness of picture using red/blue tint.
Cinema Mode
Smooth motion and picture quality for movies by matching frame rate.
Digital Noise Reduction (DNR)
Softens signal representation to reduce noise.
MPEG Noise Reduction (MPEG NR)
Reduces noise in grained MPEG signals.
Colour Transient Improvement (CTI)
Sharpens edges around colour objects on the screen.
Adaptive Luma Control
Adjusts brightness/contrast, enriches colours.
Active Backlight Control
Optimizes backlighting for dark scenes.
Blue Screen Feature
Turns screen blue and mutes sound when no signal is received.
3D Colour Management
Enables 'Base Colour Adjustment' feature.
Base Colour Adjustment
Adjust individual colours to suit preference.
HDMI RGB Range Settings
Adjusts RGB full range signal automatically (Limit/Full).
Horizontal/Vertical Position (H./V. Position)
Adjust horizontal and vertical picture position.
PC Picture Adjustments
Adjust H.Position, V.Position, Phase, Clock for PC input.
Timer Control
ClearFrame Feature
Doubles displayed frame rate to 100 frames/sec or 100 Hz.
Time Zone Setting
Set TV time based on time offset information.
Country Region ID
Option available only for Spain/Portugal with 'As Broadcaster' Time Zone.
Time Setting
Set time automatically or manually for timer functions.
Power and Sleep Timers
Power On Timer
Switches TV on automatically at a preset time.
Power Off Timer
Switches TV off automatically at a preset time.
Sleep Timer
Sets TV to turn itself off automatically after a preset time.
Input Selection and AV Connections
Input Selection
Select input source if TV does not switch over automatically.
REGZA-LINK Controls
Equipment Control
Control connected REGZA-LINK equipment via TV remote.
Input Source Selection
Select input source allowing REGZA-LINK icon.
Pass-Through Control
Control connected REGZA-LINK device using TV remote.
REGZA-LINK Menus
Activate individual REGZA-LINK features via setup menu.
One Touch Play
Automatically power on TV and switch input for audio/video equipment.
System Standby
Switches connected equipment to standby with TV.
System Audio Control
Adjust volume/mute speakers connected via AV amplifier.
PC Link
Adjusts widescreen formats/preferences for REGZA-LINK PC.
Enable REGZA-LINK
Turns on REGZA-LINK and enables other functions.
Auto Power On/Off
Switches TV on/off based on REGZA-LINK device status.
Auto Standby
Switches off TV and connected REGZA-LINK equipment.
Amplifier Control
Controls some amplifier features with TV remote.
Speaker Preference
Set audio output preference to TV or AV amplifier speakers.
Media Player
Enter Media Player
Open Media Player to view photos and music from USB.
Photo Multi-View
View images in selected folder simultaneously in a grid.
Playing Photo Slideshow
Displays images in a selected folder as an automated slideshow.
Viewing Music Files
View all music files in a selected folder in a grid.
Playing Music
Plays MP3 files stored on a USB storage device.
Preference Control
Analogue Subtitle
Set analogue subtitle on or off while watching TV.
Digital Subtitle
Use digital subtitle when multiple languages are broadcast.
Subtitle Type
Choose subtitle type: Normal or Hearing Impaired.
Audio Languages
View programmes with a choice of soundtrack language.
Audio Channel
Shows Stereo, Dual, or Mono for broadcasts.
Auto Format
Automatically display in Widescreen format if true Widescreen picture.
4:3 Stretch
Auto-stretch 4:3 picture to a Widescreen format.
Side Panel Adjustment
Lighten/darken side bands for 4:3/14:9 format.
Game Mode
Speeds up video response for game application.
Parental Control
Channel Block
Block channels that children should not watch.
Change Password
Change the 4-digit parental control password.
Time Interval Lock
Block channels between a preset time interval.
Programme Block
Prevent watching programmes based on rating limit.
Input Block
Disable specific external input signals.
Panel Lock
Lock control buttons; TV controlled only by remote.
Factory Default
Reset all TV settings, including channels, to factory values.
Digital On-Screen Information and Programme Guide
Information Display
Displays programme and event details.
Programme Guide
Access on-screen guide for programme details.
EPG Timer Setup
Set or cancel timers for selected programmes in the guide.
Software Upgrade and System Information
Auto Download
Automatically download new software upon broadcasting.
Auto Install
Install new software automatically.
System Information
Check the version of currently installed software.
Manual OAD
Manually upgrade TV software by air.
Text Services
Setting the Language
Set the teletext language.
Text Information Access
Access text pages using page numbers or buttons.
Control Buttons for Text
Guide to remote control buttons for text services.
Notes
Cleaning the Screen and Cabinet
Clean screen and cabinet with a soft, dry cloth.
Product and Battery Disposal
Information for EU-member states on product and battery disposal.

Table of Contents