Table of Contents
Advertisement
Quick Links
Thank you for buying a Turf Cruiser™/Trail Cruiser™ Utility Vehicle! Before operating your machine, read this
manual carefully and pay particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 thru 6.
Remember that all power equipment can be dangerous if used improperly. Also keep in mind that SAFETY
requires careful use in accordance with the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
† Turf Cruiser™ & Trail Cruiser™ utility vehicles are manufactured by Snapper Products Inc., McDonough, GA 30253.
MANUAL CONTENT COPYRIGHT © 2004
SNAPPER – A DIVISION OF SIMPLICITY MFG. INC.
ALL RIGHTS RESERVED
Safety Instructions & Operator's Manual For
TURF CRUISER
TRAIL CRUISER
UTILITY VEHICLES
SERIES 1
UV1621BV
UVG1621BV
UVGT1621BV
UVGT1621BV shown
NOTE: Not all utility vehicle models
come with accessories shown above.
MANUAL No. 7026153 (Rev. 2, 11/11/04)
TP 100-5107-2-GC-N
™
™
†
(7085668)
(7085632)
(7085903)
Advertisement
Table of Contents
Related Manuals for Snapper TRAIL CRUISER
Summarization of Contents
IMPORTANT SAFETY INSTRUCTIONS
Protection for Children
Safety guidelines to prevent accidents involving children.
Protection Against Tip-overs
Precautions to prevent machine tip-overs on slopes and during operation.
Carrying Loads
Guidelines for safely loading and transporting items in the cargo bed.
Towing
Safety instructions and limitations for towing trailers or attachments.
Preparation
Steps to prepare the machine and operator before use.
Safe Handling of Gasoline
Procedures for safely fueling the machine and handling gasoline.
Operation
General guidelines and warnings for operating the utility vehicle.
Powerlink™™ Generator System
Information on operating the onboard generator system.
Electric Winch Operation
Safety and operating instructions for the optional electric winch.
Maintenance
Overview of routine maintenance schedules and procedures.
SECTION 1 – FAMILIARIZATION
Introduction
Purpose and scope of the operator's manual.
Nomenclature
Identification of essential vehicle parts and components.
SECTION 1 – CONTROL IDENTIFICATION & SAFETY SIGNS
Control Identification
Identification of dashboard, pedal cluster, and console controls.
Safety Signs
Explanation and display of various warning and danger decals.
SECTION 2 – OPERATING INSTRUCTIONS
Pre-Start Checklist
Essential checks to perform before starting and operating the machine.
Controls – Function and Operation
Detailed explanation of vehicle controls, their functions, and operation.
Starting and Stopping Engine
Procedures for safely starting and stopping the vehicle's engine.
Starting and Stopping Machine Motion
Steps for safely moving the machine forward and in reverse.
Parking Machine
Instructions for properly parking the vehicle.
Using Differential Lock
Guidelines for engaging and using the differential lock for increased traction.
Driving the Machine
General procedures and considerations for driving the vehicle.
Carrying Loads
Safe practices for carrying loads in the cargo bed.
Towing
Safety recommendations and limitations for towing.
Transporting Machine
Instructions for safely transporting the utility vehicle.
Water Crossing
Warnings and advice regarding crossing water.
POWERLINK™™ On-Board Generator System Operation
How to start, use, and stop the onboard generator.
SECTION 3 – MAINTENANCE
Service - After First 5 Hours
Initial maintenance tasks to be performed after 5 hours of operation.
Service Engine Air Cleaner
Instructions for inspecting and servicing the engine air cleaner.
Check Transmission Fluid Level
Procedure to check and maintain the transmission fluid level.
Check Tire Pressure
Steps to check and adjust tire inflation pressure.
Lubrication - Axle Couplings & Steering Pins
Guide for lubricating critical pivot points and couplings.
Check Brakes
Procedure for verifying the functionality of the braking system.
Check Interlocks
Verifying the proper function of safety interlock systems.
Scheduled Service Intervals
Maintenance tasks for 25, 50, 100, and 200 operating hours.
Fluid Changes & Storage
Changing transmission fluid, fuel filter, and storage preparation.
SECTION 4 – ADJUSTMENTS & REPAIRS
Drive Belt Replacement
Step-by-step guide for replacing the drive belt.
Service Brake & Park Brake Adjustment
Adjusting the service and park brakes for optimal performance.
Battery Procedures
Battery removal, installation, charging, storage, and testing.
Latch & Shift Rod Adjustment
Adjusting cargo bed latches and transmission shift rod.
SECTION 5 – ELECTRICAL
Wiring Schematic
Diagram illustrating the vehicle's electrical system layout.
Wire Harness Detail
Detailed view and breakdown of the wire harness connections.
Need help?
Do you have a question about the TRAIL CRUISER and is the answer not in the manual?
Questions and answers