Multisync Pa Series Information - NEC LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor User Manual

 | SPECTRAVIEW II - USER'S GUIDE
10
MultiSync PA Series Information
The SpectraView II software supports the MultiSync PA241W and PA271W monitors. These models feature a
custom-designed color processor called the SpectraView Engine. This sophisticated processor, combined with
internal luminance, temperature and time monitoring of the monitor, and individual characterization and calibration
of each unit during production, results in an unparalleled level of color control, accuracy and stability.
When SpectraView II is used to calibrate these models:
The 5th of the 5 selectable Picture Modes is always automatically selected and used to store the
•
calibration made by SpectraView II.
The Custom 3 memory location is always used to store the calibration. This location will be automatically
•
named SpectraViewII.
The SpectraView II software can be used together with the MultiProfiler software. When MultiProfiler
•
is with SpectraView II, the ICC/ColorSync profile generated by SpectraView will always be activated by
MultiProfiler when the Picture Mode calibrated by SpectraView II is selected. For all other Picture Modes, the
ICC/ColorSync profiles generated by MulitProfiler will be used.
The number of Calibration and Profile steps (set in the Preferences) does not increase or decrease the
•
accuracy of the grayscale calibration when calibrating the display. This is because the monitor's internal
calibration is used.
The MultiProfiler available for free from www.necdisplay.com/multiprofiler.
Note: This version of SpectraView II software does not yet support communicating with the display via
USB, therefore DDC/CI must be used. A future update to SpectraView II will add this and other features new
to the NEC MultiSync PA Series models.