Yamaha 01X Supplementary Manual page 6

Recording/Playback/Remote Control
In this example, we've selected "8 mono in." The new
bus configuration should look like this:
r When finished, click the Close ("X") box at the top
right.
• When the 01X is set to 96kHz/88.2kHz operation, mLAN output
(from 01X to the computer) is limited to 16 channels. In this
case, the maximum number of input channels that can be acti-
vated is 16.
• Outputs
q From the Devices menu, select "VST Connections."
w Click on the Outputs tab.
e Select the desired Output preset.
As with Inputs above, there are a variety of common
configurations available from this preset menu. If you
don't see anything here that fits your particular applica-
tion, you can easily create your own output setup by
using the "Add Bus" button.
In this example, we've selected "Stereo out." The new
bus configuration should look like this:
70
01X Owner's Manual (Supplementary Manual)
r When finished, click the Close ("X") box at the top
right.
• When you are using WDM and ASIO simultaneously, refer to
"Setting in the mLAN Auto Connector" in the separate Installation
Guide.