Yamaha 01X Supplementary Manual page 10

Using the 01x with cubase sx 3
Hide thumbs Also See for 01X:
Table of Contents

Advertisement

Recording/Playback/Remote Control
Using the transport controls
These buttons let you control Cubase SX 3 in the same
way as using a tape recorder.
Rewind
Fast-forward
No matter what window is active, you can use these to con-
trol song playback/recording and navigate through the
song. Also keep in mind that all of your computer shortcut
keys are active if you want to use them— even while using
the 01X as a remote control.
Using markers
Hold down [MARKER] and use the [r] (rewind)/[f]
(fast-forward) buttons. If you've set up markers in the
song, these can be used to jump among the marker points.
Keep in mind that markers are not selected here in numeri-
cal order, but rather in the sequential order they appear in
the song. This lets you easily step through the markers as
they appear in the song's time line.
● Previous marker
● Next marker
74
01X Owner's Manual (Supplementary Manual)
Stop
Play
Record
Dial
This is like a jog/shuttle wheel on
a video deck, and gives you an
even faster way to move the song
position in the window.
Programming markers
If you haven't set up a marker or want to program a new
one, you can do this from the 01X, too. Move to the
desired song position, then press the [WRITE] button. A
new marker is set for the current postion.
Cycle playback
In Cubase SX 3, you can loop playback between the left
and right locators. To turn this on/off, press the [LOOP]
button. The [LOOP] lamp lights to indicate Loop is active.
Selecting and arming tracks
There are two ways (below) to select a track remotely.
Notice that selecting a track also automatically arms
(enables) it for recording.
• Use the [ / ] (Up/Down) cursor buttons.
Press these to select the previous or next track in the
Project window. (Note that the track is highlighted in
Cubase SX 3, and the corresponding channel [SEL] but-
ton on the 01X lights.) These buttons serve the same
function as the up/down keys on your computer key-
board.
• Press the [SEL] button of the appropriate track.
Use the BANK [</>] (Left/Right) buttons if necessary
to select the desired 'bank' of eight tracks, then press the
appropriate [SEL] button.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electone stagea 01x

Table of Contents